OEM 2006 Buick Terraza Power Steering Reservoir

2006 Buick Terraza Power Steering Reservoir Parts and Q&A

• Q: How to replace the Power Steering Reservoir on 2006 Buick Terraza?

  A: The replacement process for Power Steering Reservoir begins by setting the hydraulic pump on a steady flat surface with its shaft pointed up. You need to use a screwdriver to push the retaining clip tab outward and you should move the reservoir clip away from the hydraulic pump assembly. Remove the reservoir clip from one side of the hydraulic pump housing then take the reservoir out of the installation area. Discard both old O-ring seals that are located at the neck of the reservoir or inside the hydraulic pump housing. Before installation apply power steering fluid to the reservoir neck and place the O-ring seal on this spot. Then install the O-ring seal. To install the reservoir on the hydraulic pump assembly it should be positioned so the reservoir neck finds full engagement with the assembly. Position the reservoir feet to match the sides of the hydraulic pump housing and install the new reservoir retaining clips which come with the pump so that the tabs of the retaining clips fully enter the hydraulic pump housing.