How to Replace a Power Steering Hose for Pressure Hose on 2006 Buick Terraza?

The procedure to replace a power steering pressure pipe/hose starts by placing a drain pan underneath the Power Steering Pump and gear before removing the Drive Belt. First disconnect the power steering pressure hose from the pump before raising the vehicle while you should also disconnect the intermediate shaft from the steering gear for protection against damage. A utility stand should be used to support the frame rear while you remove the frame rear bolts and drop the frame for installation clearance. Proceed to take off the power steering gear heat shield together with its hose clip followed by disconnecting the power steering pressure hose from the steering gear and pulling out the hose from its retainer. The power steering pressure hose should be installed first followed by attaching it to the hose retainer before connecting to the steering gear with a torque of 27 nm (20 ft. Lbs.). The installation process begins by fastening the power steering gear hose clip followed by its heat shield but raise the vehicle frame with the utility stand before you complete the frame bolt installation with 165 nm (122 ft. Lbs.) torque value. After reconnecting the intermediate shaft to the steering gear and lowering the vehicle the power steering pressure hose must be attached to the pump before tightening the fitting to 27 nm (20 ft. Lbs.). The power steering system needs bleeding after installing the Drive Belt.

OEM 2006 Buick Terraza Power Steering Hose

Power Steering Pressure Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

12 Power Steering Hoses found

View related parts
2006 Buick Terraza Power Steering Cooler
Part Number: 15777213
$95.03 MSRP: $156.53
You Save: $61.50 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly-Power Steering Fluid Cooling; Power Steering Hose; Power Steering Return Hose; Cooling Pipe; Hose, Steering Fluid Cooler
- Replaced by: 19540437
- Item Weight: 1.70 Pounds
- Item Dimensions: 29.3 x 26.0 x 9.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15777213
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Buick Terraza Submodels:
- CX, CXL | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
View related parts
2006 Buick Terraza Pipe Kit
Part Number: 88963469
$15.20 MSRP: $30.53
You Save: $15.33 (51%)
ADD TO CART
Product Specifications
- Other Name: Pipe Kit, Steering Gear Left; Power Steering Hose; Pipe Kit, Hydraulic Steering Gear Pressure; Pipe Kit, Steering Gear Oil Pressure
- Item Weight: 0.80 Pounds
- Item Dimensions: 10.8 x 5.0 x 2.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 88963469
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Buick Terraza Submodels:
- CX, CXL | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
View related parts
2006 Buick Terraza Power Steering Return Hose
Part Number: 15233978
Product Specifications
- Other Name: Hose; Power Steering Hose
- Replaced by: 15777212
- Item Weight: 1.60 Pounds
- Item Dimensions: 30.4 x 25.8 x 10.3 inches
- Condition: New
- SKU: 15233978
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Buick Terraza Submodels:
- CX, CXL | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
View related parts
2006 Buick Terraza Power Steering Pressure Hose
Part Number: 15777622
Product Specifications
- Other Name: Hose Assembly-Power Steering Gear Inlet; Power Steering Hose; Pressure Hose; Hose, Hydraulic Steering Gear Pressure; Hose, Steering Gear Oil Pressure
- Replaces: 10311306
- Item Weight: 1.80 Pounds
- Item Dimensions: 22.9 x 20.5 x 2.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15777622
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Buick Terraza Submodels:
- CX, CXL | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
View related parts
2006 Buick Terraza Power Steering Pressure Hose
Part Number: 15777209
Product Specifications
- Other Name: Hose Assembly-Power Steering Gear Inlet; Power Steering Hose; Pressure Hose; Hose, Hydraulic Steering Gear Pressure; Hose, Steering Gear Oil Pressure
- Item Weight: 1.80 Pounds
- Item Dimensions: 23.2 x 17.9 x 3.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15777209
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Buick Terraza Submodels:
- CX, CXL | 6 Cyl 3.5 L GAS
View related parts
2006 Buick Terraza Power Steering Cooler
Part Number: 15777212
Product Specifications
- Other Name: Hose Assembly-Power Steering Fluid Cooling; Power Steering Hose; Power Steering Return Hose; Cooling Pipe; Hose, Steering Fluid Cooler
- Replaces: 15233978, 15197545
- Item Weight: 1.60 Pounds
- Item Dimensions: 30.7 x 25.8 x 10.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15777212
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Buick Terraza Submodels:
- CX, CXL | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
View related parts
2006 Buick Terraza Power Steering Pressure Hose
Part Number: 19333426
Product Specifications
- Other Name: Hose, Steering Gear Oil Pressure; Power Steering Hose; Pressure Hose; Hose, Hydraulic Steering Gear Pressure
- Replaces: 15777210
- Item Weight: 2.00 Pounds
- Item Dimensions: 29.5 x 16.9 x 9.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19333426
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Buick Terraza Submodels:
- CX, CXL | 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
View related parts
2006 Buick Terraza Power Steering Return Hose
Part Number: 15777207
Product Specifications
- Other Name: Pipe, Steering Gear Oil Return; Power Steering Hose; Inlet Pipe
- Replaces: 15293050
- Item Weight: 0.70 Pounds
- Item Dimensions: 22.5 x 10.9 x 4.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15777207
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Buick Terraza Submodels:
- CX, CXL | 6 Cyl 3.5 L GAS
View related parts
2006 Buick Terraza Pipe Kit, Driver Side
Part Number: 26081830
Product Specifications
- Other Name: Pipe Kit, Steering Gear; Power Steering Hose; Pressure Line; Line Kit; Line; Pipe Kit, Hydraulic Steering Gear Pressure; Pipe Kit, Steering Gear Oil Pressure
- Position: Driver Side
- Item Weight: 0.60 Pounds
- Item Dimensions: 10.7 x 3.7 x 1.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 26081830
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Buick Terraza Submodels:
- CX, CXL | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
View related parts
2006 Buick Terraza Pipe Kit, Passenger Side
Part Number: 26081831
Product Specifications
- Other Name: Pipe Kit, Steering Gear; Power Steering Hose; Pressure Line; Line Kit; Line; Pipe Kit, Hydraulic Steering Gear Pressure; Pipe Kit, Steering Gear Oil Pressure
- Position: Passenger Side
- Item Weight: 0.60 Pounds
- Item Dimensions: 18.2 x 3.1 x 1.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 26081831
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Buick Terraza Submodels:
- CX, CXL | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
View related parts
2006 Buick Terraza Power Steering Return Hose
Part Number: 15893685
Product Specifications
- Other Name: Pipe, Steering Gear Oil Return; Power Steering Hose; Inlet Pipe
- Item Weight: 2.00 Pounds
- Item Dimensions: 23.1 x 10.9 x 10.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15893685
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Buick Terraza Submodels:
- CX, CXL | 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
View related parts
2006 Buick Terraza Pipe Kit
Part Number: 88963470
Product Specifications
- Other Name: Pipe Kit, Hydraulic Steering Gear Pressure; Power Steering Hose; Pipe Kit, Steering Gear Oil Pressure
- Position: Passenger Side
- Item Weight: 0.80 Pounds
- Item Dimensions: 18.5 x 4.8 x 2.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 88963470
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Buick Terraza Submodels:
- CX, CXL | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS

2006 Buick Terraza Power Steering Hose

With a comprehensive array of OEM 2006 Buick Terraza Power Steering Hose, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2006 Buick Terraza Power Steering Hose are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2006 Buick Terraza Power Steering Hose Parts Questions & Experts Answers

Q: How to Replace a Power Steering Hose for Pressure Hose on 2006 Buick Terraza?
A: The procedure to replace a power steering pressure pipe/hose starts by placing a drain pan underneath the Power Steering Pump and gear before removing the Drive Belt. First disconnect the power steering pressure hose from the pump before raising the vehicle while you should also disconnect the intermediate shaft from the steering gear for protection against damage. A utility stand should be used to support the frame rear while you remove the frame rear bolts and drop the frame for installation clearance. Proceed to take off the power steering gear heat shield together with its hose clip followed by disconnecting the power steering pressure hose from the steering gear and pulling out the hose from its retainer. The power steering pressure hose should be installed first followed by attaching it to the hose retainer before connecting to the steering gear with a torque of 27 nm (20 ft. Lbs.). The installation process begins by fastening the power steering gear hose clip followed by its heat shield but raise the vehicle frame with the utility stand before you complete the frame bolt installation with 165 nm (122 ft. Lbs.) torque value. After reconnecting the intermediate shaft to the steering gear and lowering the vehicle the power steering pressure hose must be attached to the pump before tightening the fitting to 27 nm (20 ft. Lbs.). The power steering system needs bleeding after installing the Drive Belt.