Make sure this part fits

GM 26081830
Pipe Kit, Driver Side

2001-2006 GM

Customer Questions & Expert Answers (12)
GM 26081830 Pipe Kit, Driver Side
  • Part Description
    Pipe Kit, Steering Gear; Power Steering Hose
  • Position
    Driver Side
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2002-2006 Buick RendezvousCX, CX Plus, CXL, CXL Plus, Ultra6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS
    2005-2006 Buick TerrazaCX, CXL6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
    2005-2006 Chevrolet UplanderBase, LS, LT6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
    2002-2005 Chevrolet VentureBase, LS, LT, Plus, Value, Warner Bros.6 Cyl 3.4 L GAS
    2002-2004 Oldsmobile SilhouetteGL, GLS, Premiere6 Cyl 3.4 L GAS
    2001-2005 Pontiac AztekBase, GT, Rally6 Cyl 3.4 L GAS
    2002-2006 Pontiac MontanaBase, SV66 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
    2005-2006 Saturn Relay2, 36 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 26081830 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 26081830 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What are the final steps after securing the pressure pipe/hose for the 2005 Buick Rendezvous? Posted by Customer
    A:
    Raise and support the vehicle again, connect the pressure hose to the power steering pump, tightening the fitting to 27 Nm (20 ft. lbs.), then reinstall the right side engine splash shield and the front right tire and wheel before lowering the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What is the next step after removing the right side frame-to-body bolts for the 2004 Buick Rendezvous? Posted by Customer
    A:
    Lower the right side of the frame and powertrain with the utility stand.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What is the next step after removing the drive belt for the 2003 Buick Rendezvous? Posted by Customer
    A:
    Detach the pressure hose from the power steering pump.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What is the torque specification for the cooler pipe bracket bolts for the 2006 Buick Rendezvous? Posted by Customer
    A:
    Tighten them to 10 Nm (89 inch lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What should be done after installing the rear frame bolts for the 2005 Buick Terraza? Posted by Customer
    A:
    Remove the utility stand.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What should be done after removing the drive belt for the 2006 Buick Terraza? Posted by Customer
    A:
    Disconnect the power steering pressure hose from the pump and raise the vehicle, ensuring to disconnect the intermediate shaft from the steering gear to prevent damage.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What should be done after removing the power steering hose from the hose retainer for the 2005 Buick Terraza? Posted by Customer
    A:
    Take out the power steering pressure hose.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What should be done after loosening the fittings for the 2002 Buick Rendezvous? Posted by Customer
    A:
    Remove both cylinder line assemblies from the rack and pinion gear assembly and take out the O-ring seals, discarding them afterward.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What should be placed underneath to catch draining fluid for the 2006 Chevrolet Uplander? Posted by Customer
    A:
    A drain pan.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What should be removed after the drive belt for the 2005 Chevrolet Uplander? Posted by Customer
    A:
    The inlet hose from the power steering pump and its retainer.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What are the final steps after lowering for the 2002 Chevrolet Venture? Posted by Customer
    A:
    Lower the vehicle, reinstall the drive belt, fill the power steering fluid reservoir, and bleed the power steering system to complete the process.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Pipe Kit, Driver Side 26081830 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 26081830 Pipe Kit, Driver Side is available in the market under the name GM Power Steering Hose. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 26081830 Pipe Kit, Driver Side fits certain Chevrolet Uplander, Venture models, as well as Buick Rendezvous, Terraza. Additionally, it is compatible with Pontiac Aztek, Montana and Oldsmobile Silhouette models.
The original GM component designated by manufacturer part number 26081830 maintains top performance when functioning as the Pipe Kit, Steering Gear; Power Steering Hose unit at its Driver Side. The component 26081830 is constructed from durable material and its dimensions span 10.7 x 3.7 x 1.6 inches while weighing 0.60 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Pressure Line; Line Kit; Line; Pipe Kit, Hydraulic Steering Gear Pressure; Pipe Kit, Steering Gear Oil Pressure. The part 26081830 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.