Make sure this part fits

GM 15777622
Power Steering Pressure Hose

2001-2007 GM

Customer Questions & Expert Answers (14)
GM 15777622 Power Steering Pressure Hose
  • Part Description
    Hose Assembly-Power Steering Gear Inlet; Power Steering Hose
  • Replaces
    10311306
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2002-2007 Buick RendezvousCX, CX Plus, CXL, CXL Plus6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS
    2005-2006 Buick TerrazaCX, CXL6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
    2005-2006 Chevrolet UplanderBase, LS, LT6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
    2002-2005 Chevrolet VentureBase, LS, LT, Plus, Value, Warner Bros.6 Cyl 3.4 L GAS
    2002-2004 Oldsmobile SilhouetteGL, GLS, Premiere6 Cyl 3.4 L GAS
    2001-2005 Pontiac AztekBase, GT, Rally6 Cyl 3.4 L GAS
    2002-2006 Pontiac MontanaBase, SV66 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
    2005-2007 Saturn Relay1, 2, 36 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 15777622 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 15777622 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be done after connecting the hose to the pump for the 2005 Buick Terraza? Posted by Customer
    A:
    Tighten the fitting to 27 Nm (20 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    How should new O-ring seals be installed for the 2002 Buick Rendezvous? Posted by Customer
    A:
    Install new O-ring seals to the valve end of the cylinder lines.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What should be done after removing the power steering fluid for the 2006 Buick Rendezvous? Posted by Customer
    A:
    Raise and support the vehicle, then remove the right front tire and wheel, followed by the engine splash shield and the power steering gear heat shield.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    How do you access the front frame bolts for the 2004 Buick Rendezvous? Posted by Customer
    A:
    Remove the inner fender liner.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What is the torque specification for the retaining nut and bolt for the 2007 Buick Rendezvous? Posted by Customer
    A:
    10 N.m (89 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What is the first step to replace the Power Steering Gear Inlet Pipe/Hose for the 2007 Buick Rendezvous? Posted by Customer
    A:
    Begin by removing the intake manifold cover, drive belt, power steering pump pulley, right front tire and wheel assembly, drive belt tensioner, and power steering gear heat shield.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What is the first step in the installation process for the 2005 Buick Terraza? Posted by Customer
    A:
    Position the cooler pipe back into the vehicle and frame retainers.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    Where should the lower portion of the pressure hose be positioned for the 2003 Buick Rendezvous? Posted by Customer
    A:
    Into the right wheel opening.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What should be done after lowering for the 2005 Buick Rendezvous? Posted by Customer
    A:
    Fill the power steering reservoir with fluid, bleed the system, and inspect for leaks.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What are the final steps after reinstalling the frame for the 2006 Buick Terraza? Posted by Customer
    A:
    Remove the utility stand, reconnect the intermediate shaft to the steering gear, lower the vehicle, and connect the power steering pressure hose to the pump, tightening the fitting to 27 Nm (20 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What should be filled to complete the process for the 2005 Chevrolet Uplander? Posted by Customer
    A:
    The power steering fluid reservoir.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What is the next step after detaching the return hose for the 2006 Chevrolet Uplander? Posted by Customer
    A:
    Lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What is the next step after detaching the return hose for the 2002 Chevrolet Venture? Posted by Customer
    A:
    Lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Power Steering Pressure Hose 15777622 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 15777622 Power Steering Pressure Hose is available in the market under the name GM Hydraulic Hose, Power Steering Hose. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 15777622 Power Steering Pressure Hose fits certain Chevrolet Uplander, Venture models, as well as Buick Rendezvous, Terraza. Additionally, it is compatible with Pontiac Aztek, Montana and Oldsmobile Silhouette models.
The original GM component designated by manufacturer part number 15777622 maintains top performance when functioning as the Hose Assembly-Power Steering Gear Inlet; Power Steering Hose unit. The component 15777622 is constructed from durable material and its dimensions span 22.9 x 20.5 x 2.6 inches while weighing 1.80 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Pressure Hose; Hose, Hydraulic Steering Gear Pressure; Hose, Steering Gear Oil Pressure. The part 15777622 has available replacement options 10311306. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.