OEM 2006 Cadillac DTS Fuse Box

2006 Cadillac DTS Parts Questions & Experts Answers

• Q: How to replace the rear Fuse Box on 2006 Cadillac DTS?

  A: A proper replacement of the rear electrical center or junction block starts with removing the negative Battery Cable from the battery. Start by removing the rear fuse block cover followed by taking off the positive Battery Cable fastener from the battery and disconnecting the positive Battery Cable from the fuse block. Slide off the four retaining clips before lifting the electrical fuse block vertically to rotate it upside down. First detach all connectors from the fuse block after removing its three connector fasteners. The installation process requires attaching all connectors to the rear fuse block followed by hand-tightening the fasteners to 6 n.m (53 lb in). To install the rear fuse block into the assembly base, attach it correctly while all retention clips remain locked in place. Reinstall the positive Battery Cable along with its fastener at the rear fuse block and complete the fastener tightening to 15 n.m (11 lb ft). You should reconnect the negative Battery Cable to the battery terminal as the last step.