OEM 2006 Chevrolet Aveo A/C Accumulator

Accumulator
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 A/C Accumulator found

  • 2006 Chevy Aveo A/C Accumulator - 96539635
    2006 Chevy Aveo A/C Accumulator Diagram - 96539635
    View related parts

    2006 Chevrolet Aveo Dehydrator Part Number: 96539635

    $51.70 MSRP: $93.58
    You Save: $41.88 (45%)
    Ships in 1-2 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Dryer, A/C Refrigerant; Drier Desiccant Element; Dryer, Air Conditioning; A/C Receiver Drier; A/C Accumulator; Drier
    • Item Weight: 0.80 Pounds
    • Item Dimensions: 12.5 x 2.2 x 2.1 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 96539635
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    More Info
    Fits the following 2006 Chevrolet Aveo Submodels:
    • Base, LS, LT, Special Value | 4 Cyl 1.6 L GAS

2006 Chevrolet Aveo A/C Accumulator

With a comprehensive array of OEM 2006 Chevrolet Aveo A/C Accumulator, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2006 Chevrolet Aveo A/C Accumulator are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2006 Chevrolet Aveo A/C Accumulator Parts and Q&A

  • Q: How to replace the A/C Accumulator on 2006 Chevrolet Aveo?
    A: Begin by disconnecting the negative Battery Cable and following the given battery disconnect caution. First recover refrigerant and reverse the steps to extract the receiver-dryer together with its bolts then remove the screw from the receiver-dryer band clamp. Measure the volume and dispose of the drained oil collected from the receiver-dryer into an appropriate container. During installation only open the new receiver-dryer cap right before mounting time while you should replace exactly the same amount of oil in the new device that you removed from the old one. The receiver-dryer installation requires users to replace the o-rings in its seal area recess before setting it into the clamp with the connector block retaining bolt tightened to 14 n.m (10 lb ft). Finish the process by installing and tightening the band clamp bolt followed by negative Battery Cable reconnection and a/c system evacuation then recharging.

Related 2006 Chevrolet Aveo Parts