How to replace the blower motor resistor on 2006 Chevrolet Aveo?

Begin your task by taking away the negative Battery Cable while watching for battery disconnect caution. Unplug the electrical connector then take out the retaining screws from the resistor. Lower the resistor carefully from its position. After inserting the new resistor into the heater/air distribution case, secure it by using screws and tighten them to 6 n.m (53 lb in). Rejoin the electrical connector at the resistor then the negative Battery Cable. Afterwards test that the blower works as expected.

OEM 2006 Chevrolet Aveo Blower Motor Resistor

Heater Blower Motor Resistor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Blower Motor Resistor found

View related parts
2006 Chevrolet Aveo Resistor
Part Number: 96435889
$31.40 MSRP: $56.84
You Save: $25.44 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Resistor, Blower Motor; Blower Motor Resistor; Resistor, A/C Evaporator Blower
- Replaces: 96539658
- Item Weight: 0.50 Pounds
- Item Dimensions: 4.4 x 4.2 x 2.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 96435889
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Chevrolet Aveo Submodels:
- Base, LS, LT, Special Value | 4 Cyl 1.6 L GAS

2006 Chevrolet Aveo Blower Motor Resistor

With a comprehensive array of OEM 2006 Chevrolet Aveo Blower Motor Resistor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2006 Chevrolet Aveo Blower Motor Resistor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2006 Chevrolet Aveo Parts Questions & Experts Answers

Q: How to replace the blower motor resistor on 2006 Chevrolet Aveo?
A: Begin your task by taking away the negative Battery Cable while watching for battery disconnect caution. Unplug the electrical connector then take out the retaining screws from the resistor. Lower the resistor carefully from its position. After inserting the new resistor into the heater/air distribution case, secure it by using screws and tighten them to 6 n.m (53 lb in). Rejoin the electrical connector at the resistor then the negative Battery Cable. Afterwards test that the blower works as expected.