How to replace the brake master cylinder on 2006 Chevrolet Aveo?

You need to disconnect the power wire from the reservoir before working on the Brake Master Cylinder replacement. With the abs braking system disconnect brake lines at the master cylinder while for non-abs systems disconnect at the proportioning valves. You must remove the connection clip between the clutch hose and master cylinder while working on manual transaxle vehicles. Close Brake Line ports before removing the attaching nuts from the power booster to separate the master cylinder assembly. Disconnect and remove the sealing part from the booster housing and drain the brake fluid out of it. Affix the master cylinder assembly with new attaching nuts and use a new seal on the booster housing before tightening the nuts to 18 nm (13 ft. Lbs.). Drive vehicles with abs systems by attaching the brake lines to their cylinder body. Systems without abs should connect brake lines to proportioning valves and tighten them to 16 nm pressure units. Attach the clip back to the clutch hose connection on the master cylinder in manual transaxles before connecting the electrical connector at the reservoir. Test brake fluid addition by inspecting for leaks then verify fluid level before performing brake bleeding.

OEM 2006 Chevrolet Aveo Brake Master Cylinder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Brake Master Cylinders found

View related parts
2006 Chevrolet Aveo Booster Assembly
Part Number: 96471219
$57.00 MSRP: $435.60
You Save: $378.60 (87%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder, Brake Master Cylinder; Brake Booster
- Item Weight: 8.70 Pounds
- Item Dimensions: 17.1 x 13.6 x 13.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 96471219
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Chevrolet Aveo Submodels:
- LS, LT, Special Value | 4 Cyl 1.6 L GAS
View related parts
2006 Chevrolet Aveo Master Cylinder
Part Number: 96471211
$70.52 MSRP: $554.50
You Save: $483.98 (88%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder, Brake Master Cylinder; Brake Booster; Booster Assembly; Brake Master Cylinder
- Item Weight: 9.20 Pounds
- Item Dimensions: 16.9 x 13.4 x 13.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 96471211
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Chevrolet Aveo Submodels:
- LS, LT, Special Value | 4 Cyl 1.6 L GAS
View related parts
2006 Chevrolet Aveo Booster Assembly
Part Number: 96471214
Product Specifications
- Other Name: Cylinder, Brake Master Cylinder; Brake Booster
- Item Weight: 8.80 Pounds
- Item Dimensions: 17.4 x 13.1 x 13.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 96471214
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Chevrolet Aveo Submodels:
- LS, LT, Special Value | 4 Cyl 1.6 L GAS
View related parts
2006 Chevrolet Aveo Master Cylinder
Part Number: 93742398
Product Specifications
- Other Name: Cylinder, Brake Master Cylinder; Brake Master Cylinder
- Item Weight: 1.80 Pounds
- Item Dimensions: 11.8 x 8.8 x 5.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 93742398
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Chevrolet Aveo Submodels:
- Base, LS, LT, Special Value | 4 Cyl 1.6 L GAS
View related parts
2006 Chevrolet Aveo Master Cylinder
Part Number: 93742290
Product Specifications
- Other Name: Cylinder, Brake Master Cylinder; Brake Master Cylinder
- Item Weight: 2.00 Pounds
- Item Dimensions: 12.0 x 9.5 x 5.5 inches
- Condition: New
- SKU: 93742290
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following 2006 Chevrolet Aveo Submodels:
- Base, LS, LT, Special Value | 4 Cyl 1.6 L GAS
View related parts
2006 Chevrolet Aveo Master Cylinder
Part Number: 93742291
Product Specifications
- Other Name: Cylinder, Brake Master Cylinder; Brake Master Cylinder
- Item Weight: 2.00 Pounds
- Item Dimensions: 13.0 x 9.7 x 5.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 93742291
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Chevrolet Aveo Submodels:
- Base, LS, LT, Special Value | 4 Cyl 1.6 L GAS
View related parts
2006 Chevrolet Aveo Master Cylinder
Part Number: 93742399
Product Specifications
- Other Name: Cylinder, Brake Master Cylinder; Brake Master Cylinder
- Item Weight: 1.70 Pounds
- Item Dimensions: 11.4 x 8.3 x 5.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 93742399
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Chevrolet Aveo Submodels:
- Base, LS, LT, Special Value | 4 Cyl 1.6 L GAS
View related parts
2006 Chevrolet Aveo Master Cylinder
Part Number: 96471216
Product Specifications
- Other Name: Cylinder, Brake Master Cylinder; Brake Booster; Booster Assembly; Brake Master Cylinder
- Item Weight: 9.20 Pounds
- Item Dimensions: 17.1 x 13.6 x 13.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 96471216
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Chevrolet Aveo Submodels:
- LS, LT, Special Value | 4 Cyl 1.6 L GAS

2006 Chevrolet Aveo Brake Master Cylinder

With a comprehensive array of OEM 2006 Chevrolet Aveo Brake Master Cylinder, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2006 Chevrolet Aveo Brake Master Cylinder are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2006 Chevrolet Aveo Parts Questions & Experts Answers

Q: How to replace the brake master cylinder on 2006 Chevrolet Aveo?
A: You need to disconnect the power wire from the reservoir before working on the Brake Master Cylinder replacement. With the abs braking system disconnect brake lines at the master cylinder while for non-abs systems disconnect at the proportioning valves. You must remove the connection clip between the clutch hose and master cylinder while working on manual transaxle vehicles. Close Brake Line ports before removing the attaching nuts from the power booster to separate the master cylinder assembly. Disconnect and remove the sealing part from the booster housing and drain the brake fluid out of it. Affix the master cylinder assembly with new attaching nuts and use a new seal on the booster housing before tightening the nuts to 18 nm (13 ft. Lbs.). Drive vehicles with abs systems by attaching the brake lines to their cylinder body. Systems without abs should connect brake lines to proportioning valves and tighten them to 16 nm pressure units. Attach the clip back to the clutch hose connection on the master cylinder in manual transaxles before connecting the electrical connector at the reservoir. Test brake fluid addition by inspecting for leaks then verify fluid level before performing brake bleeding.

Related 2006 Chevrolet Aveo Parts

Alternate Year Models

2005 Chevrolet Aveo Brake Master Cylinder 2007 Chevrolet Aveo Brake Master Cylinder