OEM 2006 Chevrolet Aveo Cam Gear

2006 Chevrolet Aveo Parts Questions & Experts Answers

• Q: How to replace the Cam Gear on 2006 Chevrolet Aveo?

  A: Before changing the camshaft gear start by disconnecting the negative battery cable and taking out the engine cover bolts and Timing Belt and Timing Belt. The replacement process begins by removing three components: the Spark Plug ignition wires and crankcase ventilation tubes from the valve cover as well as the camshaft position (CMP) sensor. First remove the valve cover nuts and washers before removing both the valve cover and its gasket. After carefully maintaining the position of the intake camshaft you should remove its bolt and then remove the intake camshaft gear. After holding the exhaust camshaft in position complete the sequence by removing the exhaust camshaft gear bolt followed by the exhaust camshaft gear. When installing the camshaft gear make sure to handle it delicately before tightening the intake camshaft gear bolt to 67.5 nm (49 ft. Lbs.). Place the exhaust camshaft gear bolt and tighten it to 67.5 nm (49 ft. Lbs.). Afterwards install the exhaust camshaft gear. Complete your vehicle setup by reattaching the crankcase ventilation tubes to the valve cover, connecting the ignition wires to spark plugs and placing back the Timing Belt and engine cover followed by restoring the negative battery cable.