How to replace the Crankshaft Position Sensor on 2006 Chevrolet Aveo?

To replace the crankshaft position (CKP) sensor, disconnect the negative Battery Cable by observing the battery disconnect caution. Next, you will disconnect the ckp sensor electrical connector, you will disengange the bolt of the ckp sensor, and then you will pull out the ckp sensor. Ckp sensor installation then; place it in the position and fasten it withbolt tightening it to 6.5 n.m (58 lb in). Then reconnect the ckp sensor electrical connector and, finally, reconnect the negative Battery Cable.

OEM 2006 Chevrolet Aveo Crankshaft Position Sensor

Engine Crankshaft Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Crankshaft Position Sensor found

View related parts
2006 Chevrolet Aveo Crankshaft Position Sensor
Part Number: 25198942
$42.31 MSRP: $79.46
You Save: $37.15 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly-Crankshaft Position; Engine Crankshaft Position Sensor; Crankshaft Sensor; Sensor, Distributor (Also Knock Sensor)
- Replaces: 25182450, 96434780, 96253542
- Item Weight: 3.30 Pounds
- Item Dimensions: 3.1 x 2.0 x 17.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25198942
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Chevrolet Aveo Submodels:
- Base, LS, LT, Special Value | 4 Cyl 1.6 L GAS

2006 Chevrolet Aveo Crankshaft Position Sensor

With a comprehensive array of OEM 2006 Chevrolet Aveo Crankshaft Position Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2006 Chevrolet Aveo Crankshaft Position Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2006 Chevrolet Aveo Parts Questions & Experts Answers

Q: How to replace the Crankshaft Position Sensor on 2006 Chevrolet Aveo?
A: To replace the crankshaft position (CKP) sensor, disconnect the negative Battery Cable by observing the battery disconnect caution. Next, you will disconnect the ckp sensor electrical connector, you will disengange the bolt of the ckp sensor, and then you will pull out the ckp sensor. Ckp sensor installation then; place it in the position and fasten it withbolt tightening it to 6.5 n.m (58 lb in). Then reconnect the ckp sensor electrical connector and, finally, reconnect the negative Battery Cable.

Related 2006 Chevrolet Aveo Parts

Alternate Year Models

2005 Chevrolet Aveo Crankshaft Position Sensor 2007 Chevrolet Aveo Crankshaft Position Sensor