How to replace the Knock Sensor (KS) on 2006 Chevrolet Aveo?

In order to replace the Knock Sensor (KS) first remove the negative Battery Cable and note the battery disconnect caution. Next, you will have to remove the Intake Manifold and then disconnect the ks electrical connector before you remove ks itself. For installation, fit the ks using bolts and tighten them to 20 n.m (15 lb ft), then reconnect the ks electrical connector and reinstall the Intake Manifold. Last, reconnect the negative Battery Cable.

OEM 2006 Chevrolet Aveo Knock Sensor

Engine Knock Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Knock Sensor found

View related parts
2006 Chevrolet Aveo Knock Sensor
Part Number: 96253545
$55.08 MSRP: $171.84
You Save: $116.76 (68%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly, Knock; Ignition Knock (Detonation) Sensor; Sensor, Distributor (Also Knock Sensor)
- Replaces: 96386710
- Item Weight: 1.30 Pounds
- Item Dimensions: 7.4 x 2.1 x 1.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 96253545
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Chevrolet Aveo Submodels:
- Base, LS, LT, Special Value | 4 Cyl 1.6 L GAS

2006 Chevrolet Aveo Knock Sensor

With a comprehensive array of OEM 2006 Chevrolet Aveo Knock Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2006 Chevrolet Aveo Knock Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2006 Chevrolet Aveo Parts Questions & Experts Answers

Q: How to replace the Knock Sensor (KS) on 2006 Chevrolet Aveo?
A: In order to replace the Knock Sensor (KS) first remove the negative Battery Cable and note the battery disconnect caution. Next, you will have to remove the Intake Manifold and then disconnect the ks electrical connector before you remove ks itself. For installation, fit the ks using bolts and tighten them to 20 n.m (15 lb ft), then reconnect the ks electrical connector and reinstall the Intake Manifold. Last, reconnect the negative Battery Cable.

Related 2006 Chevrolet Aveo Parts

Alternate Year Models

2005 Chevrolet Aveo Knock Sensor 2007 Chevrolet Aveo Knock Sensor