How to replace the Knock Sensor (KS) on 2007 Chevrolet Aveo?

The replacement of a Knock Sensor (KS) requires beginning with Battery Cable disconnection. After disconnecting the ks electrical connector you need to remove the Intake Manifold before extracting the ks. Follow these steps to install the ks by using bolts while applying torque of 20 n.m (15 lb ft) to the ks bolt. Reinstall the Intake Manifold followed by reconnecting the negative Battery Cable after reattaching the ks electrical connector.

OEM 2007 Chevrolet Aveo Knock Sensor

Engine Knock Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Knock Sensor found

View related parts
2007 Chevrolet Aveo Knock Sensor
Part Number: 96253545
$55.08 MSRP: $171.84
You Save: $116.76 (68%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly, Knock; Ignition Knock (Detonation) Sensor; Sensor, Distributor (Also Knock Sensor)
- Replaces: 96386710
- Item Weight: 1.30 Pounds
- Item Dimensions: 7.4 x 2.1 x 1.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 96253545
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet Aveo Submodels:
- Base, LS, LT, Special Value | 4 Cyl 1.6 L GAS

2007 Chevrolet Aveo Knock Sensor

With a comprehensive array of OEM 2007 Chevrolet Aveo Knock Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2007 Chevrolet Aveo Knock Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2007 Chevrolet Aveo Parts Questions & Experts Answers

Q: How to replace the Knock Sensor (KS) on 2007 Chevrolet Aveo?
A: The replacement of a Knock Sensor (KS) requires beginning with Battery Cable disconnection. After disconnecting the ks electrical connector you need to remove the Intake Manifold before extracting the ks. Follow these steps to install the ks by using bolts while applying torque of 20 n.m (15 lb ft) to the ks bolt. Reinstall the Intake Manifold followed by reconnecting the negative Battery Cable after reattaching the ks electrical connector.

Related 2007 Chevrolet Aveo Parts

Alternate Year Models

2006 Chevrolet Aveo Knock Sensor 2008 Chevrolet Aveo Knock Sensor