How to replace the knock sensor on 2008 Chevrolet Aveo?

The replacement process for a Knock Sensor starts by disconnecting the black negative Battery Cable. The next step involves removing the bracket bolts from the intake manifold and then separating the bracket. Start by disconnecting the electrical connector attached to the Knock Sensor (KS). After this disconnect the bolt and extract the Knock Sensor from its position. The ks requires installation through the bolt while using 20 n.m of torque (15 lb ft force). First reconnect the ks electrical connector before reinstalling the intake manifold bracket with its bolts while tightening the upper bolt to 25 n.m (18 lb ft) and the lower bolt to 45 n.m (33 lb ft). Reattach the negative Battery Cable when wrapping up the procedure.

OEM 2008 Chevrolet Aveo Knock Sensor

Engine Knock Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Knock Sensor found

View related parts
2008 Chevrolet Aveo Knock Sensor Part Number: 96253545
$56.18 MSRP: $175.28
You Save: $119.10 (68%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly, Knock; Ignition Knock (Detonation) Sensor; Sensor, Distributor (Also Knock Sensor)
- Replaces: 96386710
- Item Weight: 1.30 Pounds
- Item Dimensions: 7.4 x 2.1 x 1.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 96253545
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Aveo Submodels:
- Base, LS, LT, Special Value | 4 Cyl 1.6 L GAS

2008 Chevrolet Aveo Knock Sensor

With a comprehensive array of OEM 2008 Chevrolet Aveo Knock Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2008 Chevrolet Aveo Knock Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2008 Chevrolet Aveo Knock Sensor Parts and Q&A

Q: How to replace the knock sensor on 2008 Chevrolet Aveo?
A: The replacement process for a Knock Sensor starts by disconnecting the black negative Battery Cable. The next step involves removing the bracket bolts from the intake manifold and then separating the bracket. Start by disconnecting the electrical connector attached to the Knock Sensor (KS). After this disconnect the bolt and extract the Knock Sensor from its position. The ks requires installation through the bolt while using 20 n.m of torque (15 lb ft force). First reconnect the ks electrical connector before reinstalling the intake manifold bracket with its bolts while tightening the upper bolt to 25 n.m (18 lb ft) and the lower bolt to 45 n.m (33 lb ft). Reattach the negative Battery Cable when wrapping up the procedure.