How to replace the Camshaft Position Sensor on 2008 Chevrolet Aveo?

Begin sensor replacement work by disconnecting the negative cable of the battery. Begin by uninstalling the engine cover bolts along with nuts before removing the cover completely. First you should disconnect the electrical connector of the camshaft position (CMP) sensor and remove the timing belt front cover. During cmp sensor installation apply the bolt and tighten it to 7 n.m (62 lb in). First put back the timing belt front cover while reconnecting the cmp sensor electrical connector then replace the engine cover. Reattach the negative Battery Cable as a last step.

OEM 2008 Chevrolet Aveo Camshaft Position Sensor

Cam Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Camshaft Position Sensor found

View related parts
2008 Chevrolet Aveo Camshaft Position Sensor
Part Number: 96253544
$37.88 MSRP: $76.94
You Save: $39.06 (51%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Engine Camshaft Position Sensor; Camshaft Sensor
- Item Weight: 0.40 Pounds
- Item Dimensions: 4.2 x 2.0 x 0.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 96253544
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Aveo Submodels:
- Base, LS, LT, Special Value | 4 Cyl 1.6 L GAS

2008 Chevrolet Aveo Camshaft Position Sensor

With a comprehensive array of OEM 2008 Chevrolet Aveo Camshaft Position Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2008 Chevrolet Aveo Camshaft Position Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2008 Chevrolet Aveo Parts Questions & Experts Answers

Q: How to replace the Camshaft Position Sensor on 2008 Chevrolet Aveo?
A: Begin sensor replacement work by disconnecting the negative cable of the battery. Begin by uninstalling the engine cover bolts along with nuts before removing the cover completely. First you should disconnect the electrical connector of the camshaft position (CMP) sensor and remove the timing belt front cover. During cmp sensor installation apply the bolt and tighten it to 7 n.m (62 lb in). First put back the timing belt front cover while reconnecting the cmp sensor electrical connector then replace the engine cover. Reattach the negative Battery Cable as a last step.

Related 2008 Chevrolet Aveo Parts

Alternate Year Models

2007 Chevrolet Aveo Camshaft Position Sensor 2009 Chevrolet Aveo Camshaft Position Sensor