How to replace the Knock Sensor without Variable Camshaft Phasing on 2009 Chevrolet Aveo?

To replace the Knock Sensor absent variable camshaft phasing, disconnect the negative Battery Cable first. Then, undo the intake manifold bracket bolts, intake manifold bracket and disconnect the Knock Sensor (KS) electrical connector. Unbolt the Knock Sensor and extract the Knock Sensor. For installation, lock the ks with the bolt to tighten at 20 nm (15 lb ft). Refit the ks electrical connector, the intake manifold bracket, and its bolts, tightening the upper bolt to 25 nm (18 lb ft); lower bolt to 45 nm (33 lb ft). Lastly, reconnect the negative Battery Cable.

OEM 2009 Chevrolet Aveo Knock Sensor

Engine Knock Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Knock Sensor found

View related parts
2009 Chevrolet Aveo Knock Sensor
Part Number: 25182900
$27.19 MSRP: $51.06
You Save: $23.87 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly, Knock; Sensor, Distributor (Also Knock Sensor)
- Replaces: 96476988
- Item Weight: 0.40 Pounds
- Item Dimensions: 4.0 x 4.0 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25182900
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Chevrolet Aveo Submodels:
- LS, LT | 4 Cyl 1.6 L GAS

2009 Chevrolet Aveo Knock Sensor

With a comprehensive array of OEM 2009 Chevrolet Aveo Knock Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2009 Chevrolet Aveo Knock Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2009 Chevrolet Aveo Parts Questions & Experts Answers

Q: How to replace the Knock Sensor without Variable Camshaft Phasing on 2009 Chevrolet Aveo?
A: To replace the Knock Sensor absent variable camshaft phasing, disconnect the negative Battery Cable first. Then, undo the intake manifold bracket bolts, intake manifold bracket and disconnect the Knock Sensor (KS) electrical connector. Unbolt the Knock Sensor and extract the Knock Sensor. For installation, lock the ks with the bolt to tighten at 20 nm (15 lb ft). Refit the ks electrical connector, the intake manifold bracket, and its bolts, tightening the upper bolt to 25 nm (18 lb ft); lower bolt to 45 nm (33 lb ft). Lastly, reconnect the negative Battery Cable.

Related 2009 Chevrolet Aveo Parts

Alternate Year Models

2008 Chevrolet Aveo Knock Sensor 2010 Chevrolet Aveo Knock Sensor