How to replace the Engine Coolant Temperature Sensor on 2009 Chevrolet Aveo?

To change engine Coolant Temperature Sensor, first, relieve the pressure in the coolant system, then apply disconnecting the negative Battery Cable. Drain the coolant below the ect sensor level, and disconnect the ect sensor connector, at that time being careful not to damage the coolant sensor because it will influence the fuel control system. Take off the ect sensor and put it with the new one and tighten it to 20 nm (15 lb ft). Then connect the ect sensor connector and later refill the cooling system, and finally connect the negative Battery Cable.

OEM 2009 Chevrolet Aveo Coolant Temperature Sensor

Coolant Water Temperature Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Coolant Temperature Sensor found

View related parts
2009 Chevrolet Aveo Coolant Temperature Sensor
Part Number: 96476965
$24.27 MSRP: $39.97
You Save: $15.70 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly, Engine Coolant Temperature; Temperature Sensor; Sensor, Coolant Temperature (Engine Unit)
- Item Weight: 0.30 Pounds
- Item Dimensions: 3.1 x 2.1 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 96476965
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Chevrolet Aveo Submodels:
- LS, LT | 4 Cyl 1.6 L GAS

2009 Chevrolet Aveo Coolant Temperature Sensor

With a comprehensive array of OEM 2009 Chevrolet Aveo Coolant Temperature Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2009 Chevrolet Aveo Coolant Temperature Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2009 Chevrolet Aveo Parts Questions & Experts Answers

Q: How to replace the Engine Coolant Temperature Sensor on 2009 Chevrolet Aveo?
A: To change engine Coolant Temperature Sensor, first, relieve the pressure in the coolant system, then apply disconnecting the negative Battery Cable. Drain the coolant below the ect sensor level, and disconnect the ect sensor connector, at that time being careful not to damage the coolant sensor because it will influence the fuel control system. Take off the ect sensor and put it with the new one and tighten it to 20 nm (15 lb ft). Then connect the ect sensor connector and later refill the cooling system, and finally connect the negative Battery Cable.

Related 2009 Chevrolet Aveo Parts

Alternate Year Models

2008 Chevrolet Aveo Coolant Temperature Sensor 2010 Chevrolet Aveo Coolant Temperature Sensor