How to replace the ignition coil with variable camshaft phasing on 2009 Chevrolet Aveo?

Before putting in the new Ignition Coil with variable camshaft phasing, disconnect the battery negative cable as the first step. Pull off the Ignition Coil cover and take the Ignition Coil connector out. Take out the Ignition Coil bolts and use the km-6009 (Remove/Install Tool) to take out the Ignition Coil . Put the new Ignition Coil where it belongs and insert the Ignition Coil bolts , turning them until they are tight at 8 nm (70.8 lb in). Put the Ignition Coil cover back on, connect the Ignition Coil to the harness, and finish by clamping the negative Battery Cable to the ground.

OEM 2009 Chevrolet Aveo Ignition Coil

Ignition Coil Resistor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Ignition Coil found

View related parts
2009 Chevrolet Aveo Ignition Coil
Part Number: 25186687
$133.33 MSRP: $239.16
You Save: $105.83 (45%)
Product Specifications
- Other Name: Coil Assembly-Ignition; Coil, Ignition Coil
- Replaced by: 12735943
- Replaces: 96476983, 55561655
- Item Weight: 6.30 Pounds
- Item Dimensions: 18.2 x 12.1 x 6.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25186687
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Chevrolet Aveo Submodels:
- LS, LT | 4 Cyl 1.6 L GAS

2009 Chevrolet Aveo Ignition Coil

With a comprehensive array of OEM 2009 Chevrolet Aveo Ignition Coil, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2009 Chevrolet Aveo Ignition Coil are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2009 Chevrolet Aveo Ignition Coil Parts Questions & Experts Answers

Q: How to replace the ignition coil with variable camshaft phasing on 2009 Chevrolet Aveo?
A: Before putting in the new Ignition Coil with variable camshaft phasing, disconnect the battery negative cable as the first step. Pull off the Ignition Coil cover and take the Ignition Coil connector out. Take out the Ignition Coil bolts and use the km-6009 (Remove/Install Tool) to take out the Ignition Coil . Put the new Ignition Coil where it belongs and insert the Ignition Coil bolts , turning them until they are tight at 8 nm (70.8 lb in). Put the Ignition Coil cover back on, connect the Ignition Coil to the harness, and finish by clamping the negative Battery Cable to the ground.

Related 2009 Chevrolet Aveo Parts

Alternate Year Models

2008 Chevrolet Aveo Ignition Coil 2010 Chevrolet Aveo Ignition Coil