How to replace the ignition coil on 2010 Chevrolet Aveo?

To replace the Ignition Coil, firstly, disconnect the battery negative cable. Lift the Ignition Coil cover away from it and remove the Ignition Coil connector. Rever the Ignition Coil bolts out, and install the km-6009 remover/installer to extract the Ignition Coil out. For installation, the installation of a new Ignition Coil is in the place where it has to be installed in ignition coils bolts, which are tightened to an 8 nm (70.8 lb in). Reconnect the Ignition Coil connector, replace the cover on the Ignition Coil and lastly reattach the negative cable back on the battery.

OEM 2010 Chevrolet Aveo Ignition Coil

Ignition Coil Resistor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Ignition Coil found

View related parts
2010 Chevrolet Aveo Ignition Coil
Part Number: 25186687
$133.33 MSRP: $239.16
You Save: $105.83 (45%)
Product Specifications
- Other Name: Coil Assembly-Ignition; Coil, Ignition Coil
- Replaced by: 12735943
- Replaces: 96476983, 55561655
- Item Weight: 6.30 Pounds
- Item Dimensions: 18.2 x 12.1 x 6.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25186687
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Aveo Submodels:
- LS, LT | 4 Cyl 1.6 L GAS

2010 Chevrolet Aveo Ignition Coil

With a comprehensive array of OEM 2010 Chevrolet Aveo Ignition Coil, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2010 Chevrolet Aveo Ignition Coil are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2010 Chevrolet Aveo Ignition Coil Parts Questions & Experts Answers

Q: How to replace the ignition coil on 2010 Chevrolet Aveo?
A: To replace the Ignition Coil, firstly, disconnect the battery negative cable. Lift the Ignition Coil cover away from it and remove the Ignition Coil connector. Rever the Ignition Coil bolts out, and install the km-6009 remover/installer to extract the Ignition Coil out. For installation, the installation of a new Ignition Coil is in the place where it has to be installed in ignition coils bolts, which are tightened to an 8 nm (70.8 lb in). Reconnect the Ignition Coil connector, replace the cover on the Ignition Coil and lastly reattach the negative cable back on the battery.

Related 2010 Chevrolet Aveo Parts

Alternate Year Models

2009 Chevrolet Aveo Ignition Coil 2011 Chevrolet Aveo Ignition Coil