How to replace the MAP Sensor on 2010 Chevrolet Aveo?

You must disconnect the negative cable from the battery during the manifold absolute pressure sensor replacement process. The first step is to disconnect the manifold air pressure (MAP) sensor connector and then remove the MAP Sensor. Install first the MAP Sensor before connecting its connector. Reattach the battery negative cable as the last step.

OEM 2010 Chevrolet Aveo MAP Sensor

Manifold Air Pressure Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 MAP Sensor found

View related parts
2010 Chevrolet Aveo M.A.P. Sensor
Part Number: 55573248
$30.16 MSRP: $56.65
You Save: $26.49 (47%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Computer Control; Air Pressure Sensor; Height Adaptation; Manifold Absolute Pressure Sensor; MAP Sensor; Ignition Module; Sensor; Sensor, Turbocharger/Supercharger
- Replaces: 12591290, 93192107
- Item Weight: 0.40 Pounds
- Item Dimensions: 2.7 x 2.2 x 1.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 55573248
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Aveo Submodels:
- LS, LT | 4 Cyl 1.6 L GAS

2010 Chevrolet Aveo MAP Sensor

With a comprehensive array of OEM 2010 Chevrolet Aveo MAP Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2010 Chevrolet Aveo MAP Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2010 Chevrolet Aveo Parts Questions & Experts Answers

Q: How to replace the MAP Sensor on 2010 Chevrolet Aveo?
A: You must disconnect the negative cable from the battery during the manifold absolute pressure sensor replacement process. The first step is to disconnect the manifold air pressure (MAP) sensor connector and then remove the MAP Sensor. Install first the MAP Sensor before connecting its connector. Reattach the battery negative cable as the last step.