How to Replace a Vehicle Speed Sensor for Output on 2009 Chevrolet Aveo?

Starting the output speed sensor replacement process requires disconnecting the negative Battery Cable first. The first step is to disconnect the electrical connector from the output speed sensor then remove the retaining bolt before extracting the sensor from the transaxle. Apply t-iv automatic transmission fluid gm p/n 88900925 (Canadian P/N 22689186) to the o-ring before putting a new o-ring on the oss sensor. Begin by tightening down the retaining bolt on the oss sensor to 7 nm (62 lb in) before connecting the electrical connector and the negative Battery Cable.

OEM 2009 Chevrolet Aveo Vehicle Speed Sensor

VSS

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Vehicle Speed Sensor found

View related parts
2009 Chevrolet Aveo Vehicle Speed Sensor Part Number: 96806579
$35.31 MSRP: $60.12
You Save: $24.81 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Vehicle Speed; Speed Sensor; Sensor, Speedometer Drive
- Item Weight: 0.40 Pounds
- Item Dimensions: 3.0 x 2.1 x 1.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 96806579
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Chevrolet Aveo Submodels:
- LS, LT | 4 Cyl 1.6 L GAS

2009 Chevrolet Aveo Vehicle Speed Sensor

With a comprehensive array of OEM 2009 Chevrolet Aveo Vehicle Speed Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2009 Chevrolet Aveo Vehicle Speed Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2009 Chevrolet Aveo Vehicle Speed Sensor Parts and Q&A

Q: How to Replace a Vehicle Speed Sensor for Output on 2009 Chevrolet Aveo?
A: Starting the output speed sensor replacement process requires disconnecting the negative Battery Cable first. The first step is to disconnect the electrical connector from the output speed sensor then remove the retaining bolt before extracting the sensor from the transaxle. Apply t-iv automatic transmission fluid gm p/n 88900925 (Canadian P/N 22689186) to the o-ring before putting a new o-ring on the oss sensor. Begin by tightening down the retaining bolt on the oss sensor to 7 nm (62 lb in) before connecting the electrical connector and the negative Battery Cable.