How to replace the MAP Sensor on 2007 Chevrolet Aveo?

Starting the replacement process requires first disconnecting the vehicle's negative Battery Cable. Start by disconnecting the electrical connector from the manifold absolute pressure (MAP) sensor before removing its bolt and finally extracting the sensor. You should fasten the MAP Sensor onto the bolt while torquing it to 10 n.m (89 lb in). Reconnect the MAP Sensor electrical connector before you complete the procedure by reconnecting the negative Battery Cable.

OEM 2007 Chevrolet Aveo MAP Sensor

Manifold Air Pressure Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 MAP Sensor found

View related parts
2007 Chevrolet Aveo Map Sensor
Part Number: 25195788
$86.53 MSRP: $167.95
You Save: $81.42 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Computer Control Sensors
- Replaces: 25184081, 96330547
- Item Weight: 0.40 Pounds
- Item Dimensions: 4.1 x 2.1 x 2.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25195788
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet Aveo Submodels:
- Base, LS, LT, Special Value | 4 Cyl 1.6 L GAS

2007 Chevrolet Aveo MAP Sensor

With a comprehensive array of OEM 2007 Chevrolet Aveo MAP Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2007 Chevrolet Aveo MAP Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2007 Chevrolet Aveo Parts Questions & Experts Answers

Q: How to replace the MAP Sensor on 2007 Chevrolet Aveo?
A: Starting the replacement process requires first disconnecting the vehicle's negative Battery Cable. Start by disconnecting the electrical connector from the manifold absolute pressure (MAP) sensor before removing its bolt and finally extracting the sensor. You should fasten the MAP Sensor onto the bolt while torquing it to 10 n.m (89 lb in). Reconnect the MAP Sensor electrical connector before you complete the procedure by reconnecting the negative Battery Cable.