OEM 2006 Chevrolet Colorado Brake Master Cylinder

2006 Chevrolet Colorado Parts Questions & Experts Answers

• Q: How to replace the brake master cylinder on 2006 Chevrolet Colorado?

  A: The brake fluid must be drained from the master cylinder reservoir before replacing this component through use of the appropriate tool. Disconnect the fluid lever sensor electrical connector before removing the brake lines from the abs module to the master cylinder. Also install rubber caps or plugs on the exposed brake pipe fitting to prevent fluid loss with contamination. The mounting bolts need removal for you to take out the master cylinder. Biach the new master cylinder before installing it onto the studs and bolt it securely at 30 nm (22 ft. Lbs.). Install the brake lines from the abs module to the master cylinder at a torque of 19 nm (14 ft. Lbs.) after removing brick caps at all connections. Complete the process by filling the reservoir with fluid before checking the brake system operation with potential brake bleeding required.