OEM 2006 Chevrolet Equinox Fuel Injector

2006 Chevrolet Equinox Parts Questions & Experts Answers

• Q: How to clean fuel injectors effectively on 2006 Chevrolet Equinox?

  A: To clean the fuel injectors the required equipment includes j 37287 (Fuel Line Shut-Off Adapters) and j 35800-a (Fuel Injector Cleaner) and j 42873-1 (3/8 Fuel Line Shut-Off Valve) and j 42873-2 (5/16 Return Pipe Shut-Off Valve) and j 42964-1 (3/8 Fuel Pipe Shut-Off Valve) and j 42964-2 (5/16 Fuel Pipe Shut-Off Valve). The cleaning operation requires gm top-engine cleaner (P/N 12346535 for US dealers and P/N 992872 for Canadian dealers). This cleaning agent must not be introduced into the fuel tank while maintaining a solution concentration below the 10 percent threshold. The cleaning solution should be added to the j 35800-a at 960 ml (32.4 oz) and will likely require two tanks of solution for its operation. Before cleaning, disable the Fuel Pump and disconnect the fuel lines then use listed shut-off adapters and valves to plug them properly. Connect the j 35800-a to the fuel rail then pressurize it to 510 kpa (75 psi) until engine stalling occurs. After finishing with the cleaning tool users must reattach the fuel lines and let the vehicle operate for 2 extra minutes. A balance test of injectors must be performed followed by replacing any problematic injectors showing a pressure drop beyond 15 kpa (2 psi). End the procedure by putting gm port Fuel Injector cleaner (P/N 12345104) or canadian p/n 10953467) into the tank then inform the customer about preventive measures to stop this issue from happening again. Drive the vehicle on the road to ensure that all issues are fixed correctly.