OEM 2006 Chevrolet HHR Throttle Body

2006 Chevrolet HHR Throttle Body Parts Questions & Experts Answers

• Q: How to replace the throttle body assembly on 2006 Chevrolet HHR?

  A: To change the Throttle Body assembly, start with detaching of the air cleaner outlet duct, then unplug the connection of the throttle actuator control (TAC) electrical connector. In the second step, you should unscrew the Throttle Body bolts and pull the Throttle Body out. Check the Throttle Body Gasket and replace if needed. For installation, mount the Throttle Body and fasten it with Throttle Body bolts to the function of 10 n.m (89 lb in), according to fastener notice. Replace the tac electrical connector and replace the air cleaner outlet duct. It is advisable not to use any solvents on the gasket surfaces, particularly those with methyl ethyl ketone (MEK), in order to avoid causing the damage to gasket surfaces and fuel system components. Also, do not prop open the throttle blade if with the ignition in the on position to prevent a diagnostic trouble code (DTC).