How to replace the Automatic Transmission Shifter lever on 2006 Chevrolet Impala?

The correct procedure for sir system disconnection should be followed before starting an automatic transmission shift lever replacement. First slide the shift lever seal ahead of the shift lever and if necessary remove the steering column trim covers. The base of the column needs shift lever connector removal before you remove the shift lever assembly's screw. Disconnect and remove both the linear shift assembly's shift lever and seal through the process of sliding the seal towards its narrow shift lever section. First put the shift lever seal in position on the small section of the shift lever assembly and next reinstall the assembly into the linear shift system. Screw the shift lever screw into the shift lever assembly before tightening it to 20 nm (15 ft. Lbs.). Slowly guide the shift lever seal to reach the bottom of the shift lever assembly and position it against the steering column trim covers. Enable the sir system after installing the steering column trim covers when required.

OEM 2006 Chevrolet Impala Automatic Transmission Shifter

AT Shifter

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Automatic Transmission Shifters found

View related parts
2006 Chevrolet Impala Shifter Assembly Part Number: 19259863
$270.37 MSRP: $404.15
You Save: $133.78 (34%)
Product Specifications
- Other Name: Control Assembly, Automatic Transmission; Automatic Transmission Selector Handle; Shift Lever; Shift Actuator; Gear Shift Assembly; Control, Transmission Shift Control Lever; Control, Transmission Shift
- Replaces: 25854855, 15874380, 15921612, 20896522
- Item Weight: 4.30 Pounds
- Item Dimensions: 16.5 x 12.5 x 8.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19259863
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Chevrolet Impala Submodels:
- 50th Anniversary Edition, LS, LT, LTZ, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
View related parts
2006 Chevrolet Impala Shift Knob Part Number: 15224313
$38.63 MSRP: $57.48
You Save: $18.85 (33%)
Product Specifications
- Other Name: Handle, Transmission Control Lever; Automatic Transmission Selector Handle
- Item Weight: 0.70 Pounds
- Item Dimensions: 11.4 x 5.3 x 5.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15224313
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Chevrolet Impala Submodels:
- 50th Anniversary Edition, LS, LT, LTZ, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
View related parts
2006 Chevrolet Impala Shift Actuator Part Number: 19150054
Product Specifications
- Other Name: Control Assembly, Automatic Transmission; Controller; Control, Transmission Shift Control Lever; Control, Transmission Shift
- Item Weight: 1.80 Pounds
- Item Dimensions: 12.2 x 4.0 x 4.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19150054
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Chevrolet Impala Submodels:
- 50th Anniversary Edition, LS, LT, LTZ, Police, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
View related parts
2006 Chevrolet Impala Shift Knob Part Number: 15224314
Product Specifications
- Other Name: Handle Assembly-Automatic Transmission Control Lever *Vr Dark Cashme; Automatic Transmission Selector Handle; Handle, Transmission Control Lever
- Item Weight: 0.80 Pounds
- Item Dimensions: 6.5 x 2.4 x 2.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15224314
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Chevrolet Impala Submodels:
- 50th Anniversary Edition, LS, LT, LTZ, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS

2006 Chevrolet Impala Automatic Transmission Shifter

With a comprehensive array of OEM 2006 Chevrolet Impala Automatic Transmission Shifter, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2006 Chevrolet Impala Automatic Transmission Shifter are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2006 Chevrolet Impala Automatic Transmission Shifter Parts and Q&A

Q: How to replace the Automatic Transmission Shifter lever on 2006 Chevrolet Impala?
A: The correct procedure for sir system disconnection should be followed before starting an automatic transmission shift lever replacement. First slide the shift lever seal ahead of the shift lever and if necessary remove the steering column trim covers. The base of the column needs shift lever connector removal before you remove the shift lever assembly's screw. Disconnect and remove both the linear shift assembly's shift lever and seal through the process of sliding the seal towards its narrow shift lever section. First put the shift lever seal in position on the small section of the shift lever assembly and next reinstall the assembly into the linear shift system. Screw the shift lever screw into the shift lever assembly before tightening it to 20 nm (15 ft. Lbs.). Slowly guide the shift lever seal to reach the bottom of the shift lever assembly and position it against the steering column trim covers. Enable the sir system after installing the steering column trim covers when required.