How to replace the Automatic Transmission Shifter lever on 2005 Chevrolet Impala?

First disable the restraints system when replacing the shift lever that functions in automatic transmission. Move the shift lever seal to the top of the shift lever then proceed to eliminate the steering column trim covers when needed. The shift lever connector must be dismounted from its base at the column while the shift lever screw must be removed from the assembly. Use caution to retrieve both the shift lever and its associated seal from the linear shift assembly by pulling them along the narrow area of the shift lever. Insert the shift lever seal to the small area of the shift lever before putting the shift lever assembly on the linear shift assembly. Screw the shift lever screw into position inside the shift lever assembly and use torque to 20 nm (15 ft. Lbs.). Push the shift lever seal down the shift lever assembly until it matches the positioning of the steering column trim covers. Complete the operation by installing any needed steering column trim covers followed by activating the restraints system.

OEM 2005 Chevrolet Impala Automatic Transmission Shifter

AT Shifter

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Automatic Transmission Shifters found

View related parts
2005 Chevrolet Impala Shift Knob, Gray Part Number: 22634975
$68.84 MSRP: $102.43
You Save: $33.59 (33%)
Product Specifications
- Other Name: Handle, Transmission Control Lever; Automatic Transmission Selector Handle; Handle, Transmission Gear Shift Control
- Replaces: 25771037, 22630428, 22605683
- Item Weight: 0.70 Pounds
- Item Dimensions: 4.9 x 4.1 x 2.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22634975
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet Impala Submodels:
- Base, LS, LS Sport, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
2005 Chevrolet Impala Gear Shift Assembly Part Number: 21996062
Product Specifications
- Other Name: Control Assembly-Automatic Transmission; Automatic Transmission Selector Handle; Shift Plate; Control, Transmission Shift Control Lever; Control, Transmission Shift
- Replaces: 10344433, 10330882
- Item Weight: 4.10 Pounds
- Item Dimensions: 17.5 x 16.2 x 7.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 21996062
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet Impala Submodels:
- Base, LS, LS Sport, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
2005 Chevrolet Impala Shift Lever Part Number: 26090114
Product Specifications
- Other Name: Lever Assembly, Automatic Transmission Control; Automatic Transmission Selector Handle; Gear Shift Assembly; Lever, Transmission Control Lever
- Item Weight: 0.70 Pounds
- Item Dimensions: 9.3 x 4.0 x 1.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 26090114
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet Impala Submodels:
- Base, LS, LS Sport, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS

2005 Chevrolet Impala Automatic Transmission Shifter

With a comprehensive array of OEM 2005 Chevrolet Impala Automatic Transmission Shifter, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2005 Chevrolet Impala Automatic Transmission Shifter are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2005 Chevrolet Impala Automatic Transmission Shifter Parts and Q&A

Q: How to replace the Automatic Transmission Shifter lever on 2005 Chevrolet Impala?
A: First disable the restraints system when replacing the shift lever that functions in automatic transmission. Move the shift lever seal to the top of the shift lever then proceed to eliminate the steering column trim covers when needed. The shift lever connector must be dismounted from its base at the column while the shift lever screw must be removed from the assembly. Use caution to retrieve both the shift lever and its associated seal from the linear shift assembly by pulling them along the narrow area of the shift lever. Insert the shift lever seal to the small area of the shift lever before putting the shift lever assembly on the linear shift assembly. Screw the shift lever screw into position inside the shift lever assembly and use torque to 20 nm (15 ft. Lbs.). Push the shift lever seal down the shift lever assembly until it matches the positioning of the steering column trim covers. Complete the operation by installing any needed steering column trim covers followed by activating the restraints system.