How to replace the front door striker on 2006 Chevrolet Impala?

The process of substituting the front door striker anchor plate requires removal of door lock pillar trim first along with upper and lower panels from the center pillar (Front Striker) and the quarter lower panel (Rear Striker). Draw the striker location with a grease marker before you remove all front door lock striker screws and finally remove the striker and shims and anchor plate. Start the installation by placing the anchor plate followed by door lock shims and striker then complete with striker screws. When positioning the door lock striker at its marked spot tighten the door lock striker screws to 25 N.m (18 lb ft). Give attention to adjusting the door lock striker when required. Finalize installation by reattaching all front and rear trims with the center pillar upper (Front Striker) piece and both center pillars lower (Front Striker) elements and quarter lower (Rear Striker).

OEM 2006 Chevrolet Impala Door Striker

Door Lock Striker

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Door Strikers found

View related parts
2006 Chevrolet Impala Lock Cylinder, Green Line, Front
Part Number: 20951578
$8.23 MSRP: $12.25
You Save: $4.02 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Striker Assembly-Front Side Door Lock; Upper Striker; Striker; Striker, Door Lock Striker
- Position: Front
- Replaces: 12451683, 15825600, 15825875, 20777165, 15840415, 25863993, 10375393, 25826965
- Item Weight: 0.60 Pounds
- Item Dimensions: 3.2 x 2.8 x 1.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 20951578
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Chevrolet Impala Submodels:
- 50th Anniversary Edition, LS, LT, LTZ, Police, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
View related parts
2006 Chevrolet Impala Striker, Rear
Part Number: 15904683
$110.82 MSRP: $164.95
You Save: $54.13 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Striker Assembly-Rear Compartment Lid Latch; Striker, Rear Compartment Lid Lock Or Liftgate
- Position: Rear
- Replaces: 10347289, 10434761
- Item Weight: 0.80 Pounds
- Item Dimensions: 6.9 x 4.4 x 4.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15904683
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Chevrolet Impala Submodels:
- 50th Anniversary Edition, LS, LT, LTZ, Police, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS

2006 Chevrolet Impala Door Striker

With a comprehensive array of OEM 2006 Chevrolet Impala Door Striker, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2006 Chevrolet Impala Door Striker are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2006 Chevrolet Impala Door Striker Parts Questions & Experts Answers

Q: How to replace the front door striker on 2006 Chevrolet Impala?
A: The process of substituting the front door striker anchor plate requires removal of door lock pillar trim first along with upper and lower panels from the center pillar (Front Striker) and the quarter lower panel (Rear Striker). Draw the striker location with a grease marker before you remove all front door lock striker screws and finally remove the striker and shims and anchor plate. Start the installation by placing the anchor plate followed by door lock shims and striker then complete with striker screws. When positioning the door lock striker at its marked spot tighten the door lock striker screws to 25 N.m (18 lb ft). Give attention to adjusting the door lock striker when required. Finalize installation by reattaching all front and rear trims with the center pillar upper (Front Striker) piece and both center pillars lower (Front Striker) elements and quarter lower (Rear Striker).