Other Name: Actuator Kit, Door Lock; Trunk Lock Actuator Motor; Door Lock Actuator; Lock Actuator; Electric and Vacuum Door Locks; End Gate Electrical Actuator Kit.
Other Name: Actuator Kit, Door Lock; Door Lock Actuator; Lock Actuator; Actuator; Actuator Kit, Door Electric And Vacuum Locks; Actuator Kit, Door And End Gate Electrical
Other Name: Latch, Rear Compartment Lid Or Tail Gate Latch; Trunk Latch; Door Lock; Latch; Latch, Rear Compartment Lid Release Or Ajar; Latch, Rear Compartment Lid
Position: Rear
Replaces: 15817924, 25795316
Item Weight: 1.10 Pounds
Item Dimensions: 9.0 x 5.5 x 4.6 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 20815645
Warranty: This genuine part is guaranteed by GM's
factory warranty.
More Info
Fits the following 2006 Chevrolet Impala Submodels:
50th Anniversary Edition, LS, LT, LTZ, Police, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
Other Name: Lock, Front Side Door; Door Lock Actuator Motor; Door Lock Actuator; Door Lock; Lock Assembly
Position: Front Passenger Side
Replaces: 25876433, 15884447
Item Weight: 1.40 Pounds
Item Dimensions: 7.8 x 5.3 x 5.3 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 20790495
Warranty: This genuine part is guaranteed by GM's
factory warranty.
More Info
Fits the following 2006 Chevrolet Impala Submodels:
50th Anniversary Edition, LS, LT, LTZ, Police, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
2006 Chevrolet Impala Door Lock Actuator
With a comprehensive array of OEM 2006 Chevrolet Impala Door Lock Actuator, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2006 Chevrolet Impala Door Lock Actuator are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.
2006 Chevrolet Impala Door Lock Actuator Parts Questions & Experts Answers
Q: How to replace the rear door lock actuator on 2006 Chevrolet Impala?
A: The first step of replacing the rear Door Lock Actuator requires removing the rear Door Lock before removing all screws holding the rear Door Lock to the actuator. The next step requires you to disconnect the rear door actuator from its position on the rear Door Lock. The rear Door Lock installation requires you to position the rear door actuator correctly with the rear Door Lock then screw it together using screws tightened up to 2 n.m (18 lb in). You should install the rear Door Lock as the last step.