How to replace the rack and pinion boot and breather tube using the J 22610 Keystone Clamp Pliers on 2006 GMC Canyon?

The J 22610 Keystone Clamp Pliers is required to change the rack and pinion boot and breather tube. Loosen looseness of the outer tie rod, hexagon jam nut by unscrewing and removing tie rod end clamp and boot clamp. Label the point of the breather tube prior to removal. Install a new boot clamp, grease, and get everything arranged and in position.

OEM 2006 GMC Canyon Rack and Pinion Boot

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Rack and Pinion Boot found

View related parts
2006 GMC Canyon Tie Rod Boot Part Number: 19133622
Product Specifications
- Other Name: Boot Kit, Steering Tie Rod; Power Steering Cylinder Boot Kit; Rack and Pinion Boot; Boot Kit; Boot Kit, Tie Rod End Dust
- Item Weight: 0.60 Pounds
- Item Dimensions: 9.5 x 3.4 x 3.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 19133622
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 GMC Canyon Submodels:
- SL, SLE, SLT, WT | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS

2006 GMC Canyon Rack and Pinion Boot

With a comprehensive array of OEM 2006 GMC Canyon Rack and Pinion Boot, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2006 GMC Canyon Rack and Pinion Boot are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2006 GMC Canyon Rack and Pinion Boot Parts and Q&A

Q: How to replace the rack and pinion boot and breather tube using the J 22610 Keystone Clamp Pliers on 2006 GMC Canyon?
A: The J 22610 Keystone Clamp Pliers is required to change the rack and pinion boot and breather tube. Loosen looseness of the outer tie rod, hexagon jam nut by unscrewing and removing tie rod end clamp and boot clamp. Label the point of the breather tube prior to removal. Install a new boot clamp, grease, and get everything arranged and in position.