How to replace the Camshaft Position Sensor on Bank 1 (Right Side) Exhaust on 2007 Buick LaCrosse?

The procedure to replace the bank 1 (Right Side) exhaust Camshaft Position Sensor should begin by turning off ignition while maintaining the Engine Control Module (ECM) and ecm redundant ground wire in position between the bracket. First disconnect the ecm bracket bolts then shift the bracket aside. You must disconnect the cmp sensor electrical connector before extracting the cmp sensor bolt and sensor itself. Install the cmp sensor into its correct position before following the fastener notice in service precautions and tightening the cmp sensor bolt to 10 n.m (89 lb in). Then place the ecm bracket over the ecm and reconnect the cmp sensor electrical connector. Finish the process by installing the ecm bracket with the ecm.

OEM 2007 Buick LaCrosse Camshaft Position Sensor

Cam Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Camshaft Position Sensors found

View related parts
2007 Buick LaCrosse Camshaft Position Sensor
Part Number: 12608424
$40.35 MSRP: $75.78
You Save: $35.43 (47%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Engine Camshaft Position Sensor; Camshaft Sensor
- Item Weight: 0.50 Pounds
- Item Dimensions: 3.3 x 2.6 x 0.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12608424
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Buick LaCrosse Submodels:
- CXS | 6 Cyl 3.6 L GAS
View related parts
2007 Buick LaCrosse Camshaft Position Sensor
Part Number: 10456148
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Crankshaft Position Sensor; Crankshaft Sensor; Camshaft Sensor
- Item Weight: 0.40 Pounds
- Item Dimensions: 2.3 x 2.3 x 2.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10456148
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Buick LaCrosse Submodels:
- CX, CXL | 6 Cyl 3.8 L GAS

2007 Buick LaCrosse Camshaft Position Sensor

With a comprehensive array of OEM 2007 Buick LaCrosse Camshaft Position Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2007 Buick LaCrosse Camshaft Position Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2007 Buick LaCrosse Parts Questions & Experts Answers

Q: How to replace the Camshaft Position Sensor on Bank 1 (Right Side) Exhaust on 2007 Buick LaCrosse?
A: The procedure to replace the bank 1 (Right Side) exhaust Camshaft Position Sensor should begin by turning off ignition while maintaining the Engine Control Module (ECM) and ecm redundant ground wire in position between the bracket. First disconnect the ecm bracket bolts then shift the bracket aside. You must disconnect the cmp sensor electrical connector before extracting the cmp sensor bolt and sensor itself. Install the cmp sensor into its correct position before following the fastener notice in service precautions and tightening the cmp sensor bolt to 10 n.m (89 lb in). Then place the ecm bracket over the ecm and reconnect the cmp sensor electrical connector. Finish the process by installing the ecm bracket with the ecm.

Related 2007 Buick LaCrosse Parts

Alternate Year Models

2006 Buick LaCrosse Camshaft Position Sensor 2008 Buick LaCrosse Camshaft Position Sensor