How to replace the Camshaft Position Sensor on Bank 2 (Left Side) Exhaust on 2008 Buick LaCrosse?

The first step to replace the Camshaft Position Sensor on bank 2 (Left Side) exhaust requires shutting off the ignition and avoiding disconnecting power steering fluid lines/hoses from their reservoir. Access to the power steering fluid reservoir becomes possible by unbolting its components then moving the reservoir to the side. Detach the camshaft position (CMP) sensor electrical connector as the first step before removing the cmp sensor bolt and extracting the cmp sensor. Installation of the cmp sensor begins with positioning it back into its original place while strictly following the fastener notice for correct steps. Fasten the cmp sensor using the bolt while tightening it to 10 n.m (89 lb in) before reattaching the cmp sensor electrical connector. The power steering fluid reservoir needs to be reinstalled as the final step.

OEM 2008 Buick LaCrosse Camshaft Position Sensor

Cam Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Camshaft Position Sensors found

View related parts
2008 Buick LaCrosse Camshaft Position Sensor
Part Number: 12608424
$40.35 MSRP: $75.78
You Save: $35.43 (47%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Engine Camshaft Position Sensor; Camshaft Sensor
- Item Weight: 0.50 Pounds
- Item Dimensions: 3.3 x 2.6 x 0.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12608424
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Buick LaCrosse Submodels:
- CXS | 6 Cyl 3.6 L GAS
View related parts
2008 Buick LaCrosse Camshaft Position Sensor
Part Number: 10456148
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Crankshaft Position Sensor; Crankshaft Sensor; Camshaft Sensor
- Item Weight: 0.40 Pounds
- Item Dimensions: 2.3 x 2.3 x 2.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10456148
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Buick LaCrosse Submodels:
- CX, CXL | 6 Cyl 3.8 L GAS
View related parts
2008 Buick LaCrosse Camshaft Position Sensor
Part Number: 12593229
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Engine Camshaft Position Sensor; Camshaft Sensor; Cam Sensor
- Item Weight: 0.40 Pounds
- Item Dimensions: 3.1 x 3.2 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12593229
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Buick LaCrosse Submodels:
- Super | 8 Cyl 5.3 L GAS

2008 Buick LaCrosse Camshaft Position Sensor

With a comprehensive array of OEM 2008 Buick LaCrosse Camshaft Position Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2008 Buick LaCrosse Camshaft Position Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2008 Buick LaCrosse Parts Questions & Experts Answers

Q: How to replace the Camshaft Position Sensor on Bank 2 (Left Side) Exhaust on 2008 Buick LaCrosse?
A: The first step to replace the Camshaft Position Sensor on bank 2 (Left Side) exhaust requires shutting off the ignition and avoiding disconnecting power steering fluid lines/hoses from their reservoir. Access to the power steering fluid reservoir becomes possible by unbolting its components then moving the reservoir to the side. Detach the camshaft position (CMP) sensor electrical connector as the first step before removing the cmp sensor bolt and extracting the cmp sensor. Installation of the cmp sensor begins with positioning it back into its original place while strictly following the fastener notice for correct steps. Fasten the cmp sensor using the bolt while tightening it to 10 n.m (89 lb in) before reattaching the cmp sensor electrical connector. The power steering fluid reservoir needs to be reinstalled as the final step.

Related 2008 Buick LaCrosse Parts

Alternate Year Models

2007 Buick LaCrosse Camshaft Position Sensor 2009 Buick LaCrosse Camshaft Position Sensor