How to replace the canister purge valves on 2007 Buick LaCrosse?

The first step for replacing the evaporative emission canister purge solenoid valve requires you to turn off the ignition. Start by disconnecting both the purge line from the solenoid valve and then disconnecting its electrical connector. Remove the Intake Manifold solenoid from its position by disconnecting the manifold side of the purge line and then removing the solenoid together with its bolt. You should start by installing the purge valve solenoid at the Intake Manifold position following a tight torque of 10 n.m (89 lb in) on the purge solenoid bolt. The installation process starts with connecting the purge line to the manifold side of the solenoid followed by electrical connector reconnection and completion through connecting the purge line to the purge valve solenoid.

OEM 2007 Buick LaCrosse Canister Purge Valves

Fuel Tank Evaporator Purge Control Valve

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Canister Purge Valves found

View related parts
2007 Buick LaCrosse PCV Valve Part Number: 12608378
$31.84 MSRP: $59.80
You Save: $27.96 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve, Evaporator Emission Canister Purge Solenoid; Purge Valve; Purge Solenoid; Purge Control Valve
- Replaced by: 12735400
- Item Weight: 0.60 Pounds
- Item Dimensions: 9.5 x 7.3 x 5.1 inches
- Condition: New
- SKU: 12608378
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Buick LaCrosse Submodels:
- CX, CXL | 6 Cyl 3.8 L GAS
View related parts
2007 Buick LaCrosse Solenoid Valve Part Number: 20952523
$41.11 MSRP: $83.48
You Save: $42.37 (51%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Solenoid Assembly-Evaporator Emission Canister; Vapor Canister Vent Solenoid; Vent Control Solenoid; Solenoid, Fuel Tank Evaporator/Purge Control
- Replaces: 15839554, 25932568
- Item Weight: 1.60 Pounds
- Item Dimensions: 24.9 x 8.0 x 7.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 20952523
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Buick LaCrosse Submodels:
- CX, CXL, CXS, Super | 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 5.3 L GAS
View related parts
2007 Buick LaCrosse Solenoid Valve Part Number: 19432156
$52.26 MSRP: $106.14
You Save: $53.88 (51%)
ADD TO CART
Product Specifications
- Other Name: Valve Assembly, Evaporator Emission Canister Purge Solenoid; Purge Valve; Purge Solenoid; Purge Control Valve; Valve, Fuel Tank Evaporator/Purge Control
- Replaced by: 19435149
- Replaces: 12591334, 12611801
- Condition: New
- SKU: 19432156
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following 2007 Buick LaCrosse Submodels:
- CXS | 6 Cyl 3.6 L GAS

2007 Buick LaCrosse Canister Purge Valves

With a comprehensive array of OEM 2007 Buick LaCrosse Canister Purge Valves, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2007 Buick LaCrosse Canister Purge Valves are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2007 Buick LaCrosse Canister Purge Valves Parts and Q&A

Q: How to replace the canister purge valves on 2007 Buick LaCrosse?
A: The first step for replacing the evaporative emission canister purge solenoid valve requires you to turn off the ignition. Start by disconnecting both the purge line from the solenoid valve and then disconnecting its electrical connector. Remove the Intake Manifold solenoid from its position by disconnecting the manifold side of the purge line and then removing the solenoid together with its bolt. You should start by installing the purge valve solenoid at the Intake Manifold position following a tight torque of 10 n.m (89 lb in) on the purge solenoid bolt. The installation process starts with connecting the purge line to the manifold side of the solenoid followed by electrical connector reconnection and completion through connecting the purge line to the purge valve solenoid.