How to Service and Repair the Mirror Switch on 2007 Buick LaCrosse?

In order to change the power mirror switch, you have to take off the front door trim panel and take off the electrical connector. Take a little tool and release the switch retainers and remove the switch. To install, plug the electrical connector, press the switch in the retainer plate and then reinsert the trim panel.

OEM 2007 Buick LaCrosse Mirror Switch

Power Mirror Control Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Mirror Switch found

View related parts
2007 Buick LaCrosse Mirror Switch, Rear Driver Side Part Number: 15791029
Product Specifications
- Other Name: Switch, Rear View Mirror-Inside & Outside; Power Mirror Switch; Switch, Rear View Mirror
- Position: Rear Driver Side
- Replaces: 10307294
- Item Weight: 0.30 Pounds
- Item Dimensions: 2.3 x 2.0 x 1.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15791029
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Buick LaCrosse Submodels:
- CX, CXL, CXS, Super | 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 5.3 L GAS

2007 Buick LaCrosse Mirror Switch

With a comprehensive array of OEM 2007 Buick LaCrosse Mirror Switch, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2007 Buick LaCrosse Mirror Switch are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2007 Buick LaCrosse Mirror Switch Parts and Q&A

Q: How to Service and Repair the Mirror Switch on 2007 Buick LaCrosse?
A: In order to change the power mirror switch, you have to take off the front door trim panel and take off the electrical connector. Take a little tool and release the switch retainers and remove the switch. To install, plug the electrical connector, press the switch in the retainer plate and then reinsert the trim panel.