How to Service and Repair the Battery Sensor on 2007 Buick Lucerne?

In an attempt to replace the Battery Current Sensor, to begin with, disconnect the negative battery cable. Then remove the sensor by taking off the tape attached to the sensor. To be installed, wrap the ground section of the cable behind the sensor and hold it in place with a piece of tape and place the negative battery cable back in place.

OEM 2007 Buick Lucerne Battery Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Battery Sensor found

View related parts
2007 Buick Lucerne Battery Current Sensor, Green Line Part Number: 13505369
$19.14 MSRP: $35.94
You Save: $16.80 (47%)
ADD TO CART
Product Specifications
- Other Name: Sensor, Battery; Voltage Sensor; Negative Cable Cover; Sensor
- Replaces: 13502261
- Item Weight: 0.40 Pounds
- Item Dimensions: 2.8 x 2.8 x 2.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 13505369
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Buick Lucerne Submodels:
- CX, CXL, CXL Special Edition, CXS, Super | 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 4.6 L GAS

2007 Buick Lucerne Battery Sensor

With a comprehensive array of OEM 2007 Buick Lucerne Battery Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2007 Buick Lucerne Battery Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2007 Buick Lucerne Battery Sensor Parts and Q&A

Q: How to Service and Repair the Battery Sensor on 2007 Buick Lucerne?
A: In an attempt to replace the Battery Current Sensor, to begin with, disconnect the negative battery cable. Then remove the sensor by taking off the tape attached to the sensor. To be installed, wrap the ground section of the cable behind the sensor and hold it in place with a piece of tape and place the negative battery cable back in place.