How to replace the Exhaust Heat Shield for the Oxygen Sensor Wiring Harness on 2007 Buick Lucerne?

The replacement process of the Oxygen Sensor wiring harness heat shield starts by raising and supporting your vehicle. Use a drill to remove the rivets so owners can separate the heat shield from its installation area where employees disconnect heated Oxygen Sensor (HO2S) module connectors. The heat shield needs removal after the disconnection of the ho2s clips. The cynic operation requires raising the heat shield to link ho2s clips then placing it against the floor panel followed by rivet installation with a gun before lowering the vehicle.

OEM 2007 Buick Lucerne Exhaust Heat Shield

Heat Shield

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Exhaust Heat Shields found

View related parts
2007 Buick Lucerne Heat Shield, Passenger Side Part Number: 12603296
Product Specifications
- Other Name: Shield-Exhaust Manifold Heat; Exhaust Heat Shield; Shield, Exhaust Manifold
- Position: Passenger Side
- Item Weight: 1.00 Pounds
- Item Dimensions: 20.5 x 9.1 x 3.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12603296
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Buick Lucerne Submodels:
- CX, CXL | 6 Cyl 3.8 L GAS
View related parts
2007 Buick Lucerne Heat Shield, Driver Side Part Number: 12603278
Product Specifications
- Other Name: Shield-Exhaust Manifold Heat; Exhaust Heat Shield; Shield, Exhaust Manifold
- Position: Driver Side
- Item Weight: 1.40 Pounds
- Item Dimensions: 22.5 x 7.2 x 6.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12603278
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Buick Lucerne Submodels:
- CX, CXL | 6 Cyl 3.8 L GAS
View related parts
2007 Buick Lucerne Heat Shield, Passenger Side Part Number: 12588277
Product Specifications
- Other Name: Shield-Exhaust Manifold Heat; Exhaust Heat Shield; Shield; Shield, Exhaust Manifold
- Position: Passenger Side
- Item Weight: 0.80 Pounds
- Item Dimensions: 17.4 x 6.1 x 5.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12588277
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Buick Lucerne Submodels:
- CX, CXL | 6 Cyl 3.8 L GAS

2007 Buick Lucerne Exhaust Heat Shield

With a comprehensive array of OEM 2007 Buick Lucerne Exhaust Heat Shield, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2007 Buick Lucerne Exhaust Heat Shield are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2007 Buick Lucerne Exhaust Heat Shield Parts Questions & Experts Answers

Q: How to replace the Exhaust Heat Shield for the Oxygen Sensor Wiring Harness on 2007 Buick Lucerne?
A: The replacement process of the Oxygen Sensor wiring harness heat shield starts by raising and supporting your vehicle. Use a drill to remove the rivets so owners can separate the heat shield from its installation area where employees disconnect heated Oxygen Sensor (HO2S) module connectors. The heat shield needs removal after the disconnection of the ho2s clips. The cynic operation requires raising the heat shield to link ho2s clips then placing it against the floor panel followed by rivet installation with a gun before lowering the vehicle.