How should one safely drain oil from gas charged shock absorbers on 2007 Buick Rendezvous?

Any attempt to remove the snap ring from within the shock absorber's top tube should be avoided due to the strong force potential that could seriously harm you. Safety glasses must be worn when centerpunching and drilling the shock absorber while avoiding puncturing of the tube. Use a centerpunch to indent the tube bottom 10 mm (0.4 in) from its lowest point. Position the shock absorber inside a vise in the horizontal orientation when the shock absorber rod exists in its fully extended position. Make a hole through the shock absorber at the centerpunch location by using a 5 mm (3/16 in) drill bit to drain gas or gas/oil mixture from the system; Place shop towels underneath to catch the leaking oil. Drill another hole at the middle of the tube using the 5 mm (3/16 in) drill bit positioned where the centerpunch marked it while using shop towels to absorb the escaping oil. Complete draining the shock absorber oil by holding it horizontally with the holes facing downwards in a drain pan while moving the rod through the tube.

OEM 2007 Buick Rendezvous Shock Absorber

Suspension Shock Absorber

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Shock Absorbers found

View related parts
2007 Buick Rendezvous Shock Absorber Part Number: 15233488
Product Specifications
- Other Name: Shock; Absorber, Front And Rear Suspension
- Position: Rear
- Replaces: 10422557, 10323930
- Item Weight: 3.30 Pounds
- Item Dimensions: 22.3 x 5.6 x 3.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 15233488
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Buick Rendezvous Submodels:
- CX, CX Plus, CXL, CXL Plus, Ultra | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS
View related parts
2007 Buick Rendezvous Shock Absorber, Rear Part Number: 15233485
Product Specifications
- Other Name: Absorber Assembly-Rear Leveling Shock; Shock; Absorber, Shock Absorber Air Lift
- Position: Rear
- Replaces: 10314753
- Item Weight: 5.50 Pounds
- Item Dimensions: 5.2 x 5.2 x 19.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 15233485
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Buick Rendezvous Submodels:
- CX, CX Plus, CXL, CXL Plus, Ultra | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS
View related parts
2007 Buick Rendezvous Strut, Front Part Number: 22064790
Product Specifications
- Other Name: Strut Assembly, Front Suspension; Complete Suspension Strut and Shock Absorber Kit.; Strut, Front And Rear Suspension
- Position: Front
- Replaces: 89060243
- Item Weight: 11.20 Pounds
- Item Dimensions: 7.3 x 25.0 x 10.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 22064790
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Buick Rendezvous Submodels:
- CX, CX Plus, CXL, CXL Plus, Ultra | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS

2007 Buick Rendezvous Shock Absorber

With a comprehensive array of OEM 2007 Buick Rendezvous Shock Absorber, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2007 Buick Rendezvous Shock Absorber are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2007 Buick Rendezvous Shock Absorber Parts and Q&A

Q: How should one safely drain oil from gas charged shock absorbers on 2007 Buick Rendezvous?
A: Any attempt to remove the snap ring from within the shock absorber's top tube should be avoided due to the strong force potential that could seriously harm you. Safety glasses must be worn when centerpunching and drilling the shock absorber while avoiding puncturing of the tube. Use a centerpunch to indent the tube bottom 10 mm (0.4 in) from its lowest point. Position the shock absorber inside a vise in the horizontal orientation when the shock absorber rod exists in its fully extended position. Make a hole through the shock absorber at the centerpunch location by using a 5 mm (3/16 in) drill bit to drain gas or gas/oil mixture from the system; Place shop towels underneath to catch the leaking oil. Drill another hole at the middle of the tube using the 5 mm (3/16 in) drill bit positioned where the centerpunch marked it while using shop towels to absorb the escaping oil. Complete draining the shock absorber oil by holding it horizontally with the holes facing downwards in a drain pan while moving the rod through the tube.