How to center the Steering Angle Sensor on 2007 Cadillac Escalade ESV?

In order to focus the steering angle sensor, find out the type of sensor prior to removal. When reusing make a mark of alignment on the cuff of the rotor flange. Unplug and pull out the sensor afterwards connect the new sensor making sure that the pin is not removed. Make sure that the connector is properly aligned and attached.

OEM 2007 Cadillac Escalade ESV Steering Angle Sensor

Steering Column Angle Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Steering Angle Sensor found

View related parts
2007 Cadillac Escalade ESV Position Sensor Part Number: 15886733
Product Specifications
- Other Name: Sensor, Steering Column; Steering Wheel Speed Sensor; Steering Angle Sensor
- Replaces: 15112675, 25833069
- Item Weight: 0.50 Pounds
- Item Dimensions: 4.2 x 3.2 x 2.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15886733
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Cadillac Escalade ESV Submodels:
- Base, Platinum | 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS

2007 Cadillac Escalade ESV Steering Angle Sensor

With a comprehensive array of OEM 2007 Cadillac Escalade ESV Steering Angle Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2007 Cadillac Escalade ESV Steering Angle Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2007 Cadillac Escalade ESV Steering Angle Sensor Parts and Q&A

Q: How to center the Steering Angle Sensor on 2007 Cadillac Escalade ESV?
A: In order to focus the steering angle sensor, find out the type of sensor prior to removal. When reusing make a mark of alignment on the cuff of the rotor flange. Unplug and pull out the sensor afterwards connect the new sensor making sure that the pin is not removed. Make sure that the connector is properly aligned and attached.