Other Name: Lifter, Engine Valve Lifter; Valve Lifter
Replaces: 05234670, 5234670
Item Weight: 2.30 Pounds
Item Dimensions: 9.0 x 3.1 x 1.1 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 17122490
Warranty: This genuine part is guaranteed by GM's
factory warranty.
More Info
Fits the following 2007 Cadillac Escalade Submodels:
Base, Hybrid, Hybrid Platinum, Luxury, Platinum, Premium | 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
Warranty: This genuine part is guaranteed by GM's
factory warranty.
More Info
Fits the following 2007 Cadillac Escalade Submodels:
Base, Hybrid, Hybrid Platinum, Luxury, Platinum, Premium, Premium Luxury, Premium Luxury Platinum, Sport, Sport Platinum | 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
2007 Cadillac Escalade Lash Adjuster
With a comprehensive array of OEM 2007 Cadillac Escalade Lash Adjuster, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2007 Cadillac Escalade Lash Adjuster are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.
2007 Cadillac Escalade Parts Questions & Experts Answers
Q: How to replace the Lash Adjuster in the RPO L92 - Second Design on 2007 Cadillac Escalade?
A: One must start by removing the Cylinder Head and gasket before taking out the Lash Adjuster guide bolts (211). Then extract both the Cylinder Head guides (210) and adjusters (209) keeping track of their original positions because the notched areas of the guides must face the engine block's locating tab. Remove the Lash Adjuster guides (210) with built-in adjusters but keep track of their installation order since the guide's notch area must match the block's locating tab. Before reinstallation simply organize or mark each component for its correct placement. Performance inspection and cleaning of lash adjusters should be performed according to necessity. During installation apply clean engine oil to both lash adjusters (209) and engine block Lash Adjuster bores. Guide the lash adjusters so that the adjuster guide bore's flat surface matches the top flat area of the adjuster before you push the adjuster down fully into its guide bore. Install the engine block lash adjusters along with guide (210) before tightening corresponding Lash Adjuster guide bolts to 12 n.m (106 lb in). Reinstall the Cylinder Head together with its gasket.