OEM 2007 Cadillac SRX Seat Motor

2007 Cadillac SRX Seat Motor Parts Questions & Experts Answers

• Q: How to Replace the Seat Motor in the Rear Seat Number 2 Back Pivot Actuator on 2007 Cadillac SRX?

  A: Commence by removing the seat from the car and continue with the removal of rear seat back panel together with head restraints and rear seat back cover. First detach inner recliner arm covers from the seat back while you remove the outer recliner arm cover screws before pulling off the outer recliner arm pivot covers. First separate the rotation motor electrical connector before removing its bolts and sliding the rotation motor away from the driveshaft end. To install the rotation motor simply place it on the driveshaft after which you must install and tighten the rotation motor mounting bolts to 7 n.m (62 lb in). First connect the electrical connector to the rotation motor before putting on the outer recliner arm pivot covers followed by securement of the outer recliner arm cover screws to 2 n.m (18 lb in). Follow the sequence of attaching the rear seat back cover while the inner recliner arm covers should be installed on the seat back before the head restraints and rear seat back panel. Extend the seat into the vehicle while performing the calibration process. Then mount the seat back according to the provided instructions.