ChevyParts
My Garage
My Account
Cart
OEM 2007 Cadillac XLR Antenna Cable
Radio Antenna Cable- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
6 Antenna Cables found
2007 Cadillac XLR Antenna Cable, Driver Side
Part Number: 10380504$44.20 MSRP: $83.01You Save: $38.81 (47%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Cable, Radio Antenna; Cable
- Position: Driver Side
- Item Weight: 0.40 Pounds
- Item Dimensions: 215.3 x 2.3 x 1.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10380504
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Product Specifications- Other Name: Cable, Mobile Telephone Radio; Cable, Vehicle Navigation/Information; Cable, Radio Antenna
- Item Weight: 0.90 Pounds
- Item Dimensions: 12.9 x 9.7 x 2.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10350980
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Product Specifications- Other Name: Cable, Radio Antenna; Cable
- Position: Passenger Side
- Item Weight: 0.40 Pounds
- Item Dimensions: 9.1 x 6.7 x 4.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10380505
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Product Specifications- Other Name: Cable Assembly-Radio Antenna; Cable, Radio Antenna
- Item Weight: 0.50 Pounds
- Item Dimensions: 15.2 x 4.7 x 4.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10317571
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Product Specifications- Other Name: Cable, Radio Antenna
- Position: Driver Side
- Item Weight: 0.30 Pounds
- Item Dimensions: 5.2 x 3.4 x 0.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10318391
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Product Specifications- Other Name: Cable, Radio Antenna
- Position: Passenger Side
- Item Weight: 0.30 Pounds
- Item Dimensions: 5.1 x 3.3 x 0.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10318392
- Warranty: This genuine part is guaranteed by GM's factory warranty.
2007 Cadillac XLR Antenna Cable
With a comprehensive array of OEM 2007 Cadillac XLR Antenna Cable, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2007 Cadillac XLR Antenna Cable are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.
2007 Cadillac XLR Parts Questions & Experts Answers
- Q: How to replace the antenna cable on 2007 Cadillac XLR?A: Start antenna cable replacement by taking off the right door sill plate and the right lock pillar trim. Before proceeding with the antenna cable replacement start by unscrewing the I/P wiring harness from its body retaining clips and pulling out the floor panel support I/P wiring harness push-in retainers. Remove the I/P right lower insulator panel while you create separate paths for the antenna coaxial cable and the radio control coaxial cable and the I/P wiring harness. The coaxial cable must be detached from the insulation tape that runs along the hinge pillar followed by removal of windshield side garnish moldings sunshades and windshield upper garnish molding. To remove the coaxial cable outside of the vehicle it is necessary to first disconnect it from the front windshield antenna connector and then remove the tape which adheres to the windshield frame. Every step of installation involves placing the coaxial cable within the front windshield before taping it to the windshield frame for security purposes. Position the front windshield antenna connector first and then finally reattach windshield upper garnish molding, sunshades, and windshield side garnish moldings. Before moving on to install the cable at the I/P right lower insulator panel users should first attach it to the insulation tape on the hinge pillar. Fasten the I/P wiring harness push-in retainers into the floor panel support then lock the I/P wiring harness to the body retaining clips. At the final step connect the coaxial cable to the antenna module wire harness lead while reinstalling the left lock pillar trim and left door sill plate.
Related 2007 Cadillac XLR Parts
2007 Cadillac XLR Antenna
2007 Cadillac XLR Body Control Module
2007 Cadillac XLR Coolant Temperature Sensor
2007 Cadillac XLR Engine Control Module
2007 Cadillac XLR Fuel Level Sensor
2007 Cadillac XLR Fuel Pump Relay
2007 Cadillac XLR Fuse Box
2007 Cadillac XLR Instrument Cluster
2007 Cadillac XLR Knock Sensor
2007 Cadillac XLR Seat Switch
2007 Cadillac XLR Suspension Control Module
2007 Cadillac XLR Wiper Motor