How to Service and Repair the Fuel Pressure Sensor on 2007 Cadillac XLR?

The replacement of Fuel Tank Pressure Sensor will require the removal of the EVAP canister accessor and the right rear wheelhouse liner panel. Note- Loosen the electrical connector of the sensor, remove the sensor, lubricate the grommet and replace the sensor, reconnect the electrical connector, and replace the covers.

OEM 2007 Cadillac XLR Fuel Pressure Sensor

Fuel Tank Pressure Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Fuel Pressure Sensor found

View related parts
2007 Cadillac XLR Fuel Pressure Regulator, Passenger Side Part Number: 16238399
$54.17 MSRP: $101.06
You Save: $46.89 (47%)
ADD TO CART
Product Specifications
- Other Name: Sensor, Fuel Tank Pressure; Fuel Tank Pressure Sensor; Fuel Pressure Sensor; Pressure Regulator; Sensor, Early Fuel Evaporation; Fuel Gauge Sending Unit; Tank Pressure Sensor
- Position: Passenger Side
- Replaces: 12206740, 16217059, 16257276, 22678829, 09377680, 12219388, 16196060, 9377680
- Item Weight: 0.30 Pounds
- Item Dimensions: 3.3 x 2.2 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 16238399
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Cadillac XLR Submodels:
- Base, Platinum, V | 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS

2007 Cadillac XLR Fuel Pressure Sensor

With a comprehensive array of OEM 2007 Cadillac XLR Fuel Pressure Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2007 Cadillac XLR Fuel Pressure Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2007 Cadillac XLR Fuel Pressure Sensor Parts and Q&A

Q: How to Service and Repair the Fuel Pressure Sensor on 2007 Cadillac XLR?
A: The replacement of Fuel Tank Pressure Sensor will require the removal of the EVAP canister accessor and the right rear wheelhouse liner panel. Note- Loosen the electrical connector of the sensor, remove the sensor, lubricate the grommet and replace the sensor, reconnect the electrical connector, and replace the covers.