OEM 2007 Chevrolet Aveo Turn Signal Switch

2007 Chevrolet Aveo Parts Questions & Experts Answers

• Q: How to replace the Turn Signal Switch on 2007 Chevrolet Aveo?

  A: The first step for Turn Signal Multifunction Switch replacement requires removal of the negative battery cable. Screw and remove (6, 7, 8) the lower steering column cover panel screws before taking off the lower steering column cover panel . You should turn your steering wheel toward access the three upper steering column cover panel screws at positions 3 and 4. After removing these screws you can take out the upper steering column cover panel. Push the tabs (2, 3) at each end of the switch housing to extract the turn signal switch while disconnecting its electrical connectors (1, 4). During the installation process first attach the electrical connectors (1, 4) to the new turn signal switch and place the switch inside the housing. Ensure proper fastener alignment then turn the steering wheel before installing the upper steering column cover panel with screws number 3 and number 4 tightened to 3 N.m (27 lb in). Position and screw in the lower steering column cover panel using bolts 6, 7, 8 while tightening each screw to meet 3 N.m (27 lb in) torque value. Finish the installation by connecting the negative cable.