OEM 2007 Chevrolet HHR Control Arm Bushing

2007 Chevrolet HHR Control Arm Bushing Parts Questions & Experts Answers

• Q: How to replace the front lower control arm bushing on 2007 Chevrolet HHR?

  A: The first step to replace front lower Control Arm Bushing demands vehicle elevation alongside support methods. Before putting the lower Control Arm into the vise you must wrap it with a shop towel then secure it in the vise. Note down the size and position of the original bushing before you remove it from the system. The front Control Arm Bushing set (J 41211) enables installation of the Control Arm Bushing through the Control Arm before the tools need repacking and extraction of the bushing. Set the Control Arm Bushing on the tapered side then use the front Control Arm Bushing set (J 41211) to draw the Control Arm Bushing through from the opposite direction for installation. Insert the bushing into the Control Arm until it reaches its original removal depth and orient it correctly before removing the front Control Arm Bushing set (J 41211). After this, reinstall the Control Arm.