How to replace the front shock absorber on 2007 Chevrolet HHR?

The starting point for strut assembly replacement necessitates removal of upper mounting nuts. The vehicle should be lifted with frame-contact vehicle lifts only because any contact with the suspension can create difficulties. Support the vehicle using a frame-contact vehicle lift and then eliminate the tire and wheel before disconnecting the stabilizer shaft link from the strut assembly. Start by removing both lower struts together along with their bolts and nuts before removing the abs wiring bracket (if available) from the assembly. Follow the fastener notice before starting with strut assembly installation. Secure the strut upper mounting nuts with a torque of 20 n.m (15 lb ft). A prevailing torque fastener can be reused if both components show no signs of rust and if it successfully resists 3 n.m (27 lb in) of torque/drag before properly bedding in; however, total replacement may be necessary in some cases. Otherwise, replace the fastener. Equipment-dependent installation requires screws, nuts and an abs wiring bracket which needs mounting before applying 120 n.m (89 lb ft) torque to lower strut nuts. Secure the stabilizer shaft link to the strut assembly following proper torque settings at 80 n.m (59 lb ft). After this step install the tire and wheel while lowering the vehicle and perform front wheel alignment.

OEM 2007 Chevrolet HHR Shock Absorber

Suspension Shock Absorber

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Shock Absorbers found

View related parts
2007 Chevrolet HHR Strut, Front Driver Side
Part Number: 20794267
$143.57 MSRP: $259.84
You Save: $116.27 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Strut Kit-Front Suspension; Complete Suspension Strut and Shock Absorber Assembly.; Strut Kit, Front And Rear Suspension
- Position: Front Driver Side
- Replaces: 15247243, 88964331, 15798897, 15876215
- Item Weight: 8.80 Pounds
- Item Dimensions: 9.2 x 8.2 x 25.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 20794267
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet HHR Submodels:
- LS, LS Panel, LT, LT Panel, SS, SS Panel | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS
View related parts
2007 Chevrolet HHR Strut, Front Passenger Side
Part Number: 20794268
$129.74 MSRP: $243.64
You Save: $113.90 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Strut Kit-Front Suspension; Complete Suspension Strut and Shock Absorber Assembly.; Strut Kit, Front And Rear Suspension
- Position: Front Passenger Side
- Replaces: 15876216, 15247244, 15798898
- Item Weight: 8.70 Pounds
- Item Dimensions: 24.5 x 9.1 x 8.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 20794268
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet HHR Submodels:
- LS, LS Panel, LT, LT Panel, SS, SS Panel | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS
View related parts
2007 Chevrolet HHR Strut, Front Passenger Side
Part Number: 20794270
$122.86 MSRP: $220.35
You Save: $97.49 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Strut Kit-Front Suspension; Shock Absorber; Strut Kit, Front And Rear Suspension
- Position: Front Passenger Side
- Replaces: 15798900, 15876218
- Item Weight: 3.50 Pounds
- Item Dimensions: 29.3 x 9.4 x 9.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 20794270
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet HHR Submodels:
- LS, LS Panel, LT, LT Panel, SS, SS Panel | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS
View related parts
2007 Chevrolet HHR Shock Absorber
Part Number: 15780243
$68.45 MSRP: $122.25
You Save: $53.80 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Suspension Strut and Shock Absorber Assembly Kit; Complete Strut and Shock Absorber Set.; Shock; Absorber, Front And Rear Suspension
- Position: Rear
- Item Weight: 3.50 Pounds
- Item Dimensions: 19.3 x 4.8 x 4.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 15780243
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet HHR Submodels:
- LS, LS Panel, LT, LT Panel, SS, SS Panel | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS
View related parts
2007 Chevrolet HHR Shock Absorber
Part Number: 15806888
$72.67 MSRP: $129.75
You Save: $57.08 (44%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Suspension Strut and Shock Absorber Assembly Kit; Complete Strut and Shock Absorber Set.; Shock; Absorber, Front And Rear Suspension
- Position: Rear
- Item Weight: 2.30 Pounds
- Item Dimensions: 5.2 x 5.2 x 19.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 15806888
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet HHR Submodels:
- LS, LS Panel, LT, LT Panel, SS, SS Panel | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS
View related parts
2007 Chevrolet HHR Strut, Front Driver Side
Part Number: 20794269
Product Specifications
- Other Name: Strut Kit-Front Suspension; Complete Suspension Strut and Shock Absorber Assembly.; Strut Kit, Front And Rear Suspension
- Position: Front Driver Side
- Replaces: 15876217, 15798899
- Item Weight: 9.50 Pounds
- Item Dimensions: 9.5 x 8.5 x 25.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 20794269
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet HHR Submodels:
- LS, LS Panel, LT, LT Panel, SS, SS Panel | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS

2007 Chevrolet HHR Shock Absorber

With a comprehensive array of OEM 2007 Chevrolet HHR Shock Absorber, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2007 Chevrolet HHR Shock Absorber are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2007 Chevrolet HHR Shock Absorber Parts Questions & Experts Answers

Q: How to replace the front shock absorber on 2007 Chevrolet HHR?
A: The starting point for strut assembly replacement necessitates removal of upper mounting nuts. The vehicle should be lifted with frame-contact vehicle lifts only because any contact with the suspension can create difficulties. Support the vehicle using a frame-contact vehicle lift and then eliminate the tire and wheel before disconnecting the stabilizer shaft link from the strut assembly. Start by removing both lower struts together along with their bolts and nuts before removing the abs wiring bracket (if available) from the assembly. Follow the fastener notice before starting with strut assembly installation. Secure the strut upper mounting nuts with a torque of 20 n.m (15 lb ft). A prevailing torque fastener can be reused if both components show no signs of rust and if it successfully resists 3 n.m (27 lb in) of torque/drag before properly bedding in; however, total replacement may be necessary in some cases. Otherwise, replace the fastener. Equipment-dependent installation requires screws, nuts and an abs wiring bracket which needs mounting before applying 120 n.m (89 lb ft) torque to lower strut nuts. Secure the stabilizer shaft link to the strut assembly following proper torque settings at 80 n.m (59 lb ft). After this step install the tire and wheel while lowering the vehicle and perform front wheel alignment.