How should one safely handle gas charged shock absorbers during maintenance on Chevrolet HHR?

The high-pressure gas inside gas charged shock absorbers requires that you maintain the snap ring in its position since removing it produces dangerous eruption of contents that can cause severe injuries. Put on safety glasses when performing shock absorber centerpunching and drilling procedures to avoid both shock absorber tube puncture and personal injury. Use a centerpunch to create an indentation which should be located 10 mm (0.4 inch) from the tube's bottom. A vise should position the shock absorber horizontally while its shock absorber rod extends fully. The 5 mm (3/16 inch) drill bit chisels through the centerpunch while a clamp catches the escaping gas or gas/oil mix; shop towels control the oil discharge. After drilling the first hole through the tube's centerpunch position a second hole needs to be prepared at the same centerpunch point with the identical drill bit for oil release. Protect from leaking oil by using shop towels similar to earlier usage. Complete the oil drain by moving the rod inside the tube through the holes which face downwards while the shock absorber rests above a drain pan.

OEM Chevrolet HHR Shock Absorber

Suspension Shock Absorber

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

10 Shock Absorbers found

View related parts
Chevrolet HHR Strut, Front
Part Number: 20795223
$110.05 MSRP: $206.67
You Save: $96.62 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Strut Kit-Front Suspension; Complete Suspension Strut and Shock Absorber Assembly.; Strut Kit, Front And Rear Suspension
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2009-2011 Chevrolet HHR | LS, LS Panel, LT, LT Panel | 4 Cyl 2.2 L FLEX, 4 Cyl 2.4 L FLEX
View related parts
Chevrolet HHR Strut, Front Passenger Side
Part Number: 20794270
$74.45 MSRP: $220.35
You Save: $145.90 (67%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Strut Kit-Front Suspension; Shock Absorber; Strut Kit, Front And Rear Suspension
- Position: Front Passenger Side
- Replaces: 15798900, 15876218
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2011 Chevrolet HHR | LS, LS Panel, LT, LT Panel, SS, SS Panel | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS
View related parts
Chevrolet HHR Strut, Front Passenger Side
Part Number: 20794268
$129.74 MSRP: $243.64
You Save: $113.90 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Strut Kit-Front Suspension; Complete Suspension Strut and Shock Absorber Assembly.; Strut Kit, Front And Rear Suspension
- Position: Front Passenger Side
- Replaces: 15876216, 15247244, 15798898
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2011 Chevrolet HHR | LS, LS Panel, LT, LT Panel, SS, SS Panel | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS
View related parts
Chevrolet HHR Strut, Front Driver Side
Part Number: 20794267
$143.57 MSRP: $259.84
You Save: $116.27 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Strut Kit-Front Suspension; Complete Suspension Strut and Shock Absorber Assembly.; Strut Kit, Front And Rear Suspension
- Position: Front Driver Side
- Replaces: 15247243, 88964331, 15798897, 15876215
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2011 Chevrolet HHR | LS, LS Panel, LT, LT Panel, SS, SS Panel | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS
View related parts
Chevrolet HHR Shock Absorber
Part Number: 15780243
$41.28 MSRP: $122.25
You Save: $80.97 (67%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Suspension Strut and Shock Absorber Assembly Kit; Complete Strut and Shock Absorber Set.; Shock; Absorber, Front And Rear Suspension
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2011 Chevrolet HHR | LS, LS Panel, LT, LT Panel, SS, SS Panel | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS
View related parts
Chevrolet HHR Shock Absorber
Part Number: 15806888
$43.84 MSRP: $129.75
You Save: $85.91 (67%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Suspension Strut and Shock Absorber Assembly Kit; Complete Strut and Shock Absorber Set.; Shock; Absorber, Front And Rear Suspension
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2011 Chevrolet HHR | LS, LS Panel, LT, LT Panel, SS, SS Panel | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS
View related parts
Chevrolet HHR Strut, Front Driver Side
Part Number: 20794824
Product Specifications
- Other Name: Strut Kit-Front Suspension; Shock Absorber; Strut Kit, Front And Rear Suspension
- Position: Front Driver Side
- Replaces: 19179741
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2008-2010 Chevrolet HHR | LS, LS Panel, LT, LT Panel, SS, SS Panel | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS
View related parts
Chevrolet HHR Strut, Front Driver Side
Part Number: 20794269
Product Specifications
- Other Name: Strut Kit-Front Suspension; Complete Suspension Strut and Shock Absorber Assembly.; Strut Kit, Front And Rear Suspension
- Position: Front Driver Side
- Replaces: 15876217, 15798899
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2011 Chevrolet HHR | LS, LS Panel, LT, LT Panel, SS, SS Panel | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS
View related parts
Chevrolet HHR Strut, Passenger Side
Part Number: 19179738
Product Specifications
- Other Name: Strut Kit, Front And Rear Suspension; Shock Absorber
- Position: Passenger Side
- Replaces: 19179740, 20794825
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2008-2010 Chevrolet HHR | LS, LS Panel, LT, LT Panel, SS, SS Panel | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS
View related parts
Chevrolet HHR Shock
Part Number: 15938031
Product Specifications
- Other Name: Shock Absorber; Suspension Shock Absorber; Absorber, Front And Rear Suspension
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2008-2010 Chevrolet HHR | SS, SS Panel | 4 Cyl 2.0 L GAS

Chevrolet HHR Shock Absorber

Our website offers an extensive catalog of genuine Chevrolet HHR Shock Absorber at unbeatable prices. Every OEM Chevrolet HHR Shock Absorber comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Chevrolet HHR Shock Absorber Parts Questions & Experts Answers

Strut, Front Passenger Side
20794270
Q: How should one safely handle gas charged shock absorbers during maintenance on Chevrolet HHR?
A: The high-pressure gas inside gas charged shock absorbers requires that you maintain the snap ring in its position since removing it produces dangerous eruption of contents that can cause severe injuries. Put on safety glasses when performing shock absorber centerpunching and drilling procedures to avoid both shock absorber tube puncture and personal injury. Use a centerpunch to create an indentation which should be located 10 mm (0.4 inch) from the tube's bottom. A vise should position the shock absorber horizontally while its shock absorber rod extends fully. The 5 mm (3/16 inch) drill bit chisels through the centerpunch while a clamp catches the escaping gas or gas/oil mix; shop towels control the oil discharge. After drilling the first hole through the tube's centerpunch position a second hole needs to be prepared at the same centerpunch point with the identical drill bit for oil release. Protect from leaking oil by using shop towels similar to earlier usage. Complete the oil drain by moving the rod inside the tube through the holes which face downwards while the shock absorber rests above a drain pan.

Related Chevrolet HHR Parts

Browse Chevrolet HHR Shock Absorber by Years

2011 2010 2009 2008 2007 2006