How to replace the antenna cable on 2007 Chevrolet Impala?

First remove the rear upper quarter trim panel and disconnect the Antenna Cable from the radio antenna module. Start by removing the rear seat cushion followed by the rear seat back before you move to the right carpet retainers and right lower center pillar trim panel. Adjust the carpet when necessary to reach the Antenna Cable and unplug the Antenna Cable from the antenna extension cable . Trim the Antenna Cable sections exposed to view off the wiring harnesses found both in the kick panel region and the rear shelf region. To attach the Antenna Cable install electrical tape on the vehicle to fasten the antenna extension cable on top of the wiring harness at intervals not exceeding 150mm (6 inches). Watch out for the sliding snap-lock component since maintaining pressure on it blocks successful installation. Install the antenna extension cable from the radio to the Antenna Cable near the kick panel by sliding it through the locking mechanism behind the sliding lock and securing the installation to the sliding lock. Reinstall carpet then right lower center pillar trim panel followed by right carpet retainers before installing rear seat back and rear seat cushion. Put the Antenna Cable behind the sliding lock before you install it to the sliding lock to connect the Antenna Cable with the radio antenna module. Then reinstall the rear upper quarter trim panel.

OEM 2007 Chevrolet Impala Antenna Cable

Radio Antenna Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Antenna Cables found

View related parts
2007 Chevrolet Impala Antenna Cable
Part Number: 19115069
Product Specifications
- Other Name: Cable Assembly, Radio Antenna; Cable, Radio Antenna
- Item Weight: 0.90 Pounds
- Item Dimensions: 13.9 x 13.0 x 3.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19115069
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet Impala Submodels:
- LS, LT, LTZ, Police, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
View related parts
2007 Chevrolet Impala Cable
Part Number: 15879137
Product Specifications
- Item Weight: 0.40 Pounds
- Item Dimensions: 162.3 x 1.5 x 0.9 inches
- Condition: New
- SKU: 15879137
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following 2007 Chevrolet Impala Submodels:
- 50th Anniversary Edition, LS, LT, LTZ, Police, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
View related parts
2007 Chevrolet Impala Antenna Cable
Part Number: 15235718
Product Specifications
- Other Name: Cable
- Item Weight: 0.40 Pounds
- Item Dimensions: 137.9 x 1.5 x 0.9 inches
- Condition: New
- SKU: 15235718
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following 2007 Chevrolet Impala Submodels:
- 50th Anniversary Edition, LS, LT, LTZ, Police, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
View related parts
2007 Chevrolet Impala Cable
Part Number: 19115211
$14.15 MSRP: $25.26
You Save: $11.11 (44%)
Product Specifications
- Other Name: Cable Assembly, Radio Antenna
- Item Weight: 0.80 Pounds
- Item Dimensions: 12.9 x 12.4 x 3.5 inches
- Condition: New
- SKU: 19115211
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following 2007 Chevrolet Impala Submodels:
- LS, LT, LTZ, Police, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
View related parts
2007 Chevrolet Impala Cable
Part Number: 19115367
Product Specifications
- Other Name: Cable Assembly, Radio Antenna; Cable, Radio Antenna
- Item Weight: 0.80 Pounds
- Item Dimensions: 13.2 x 9.4 x 2.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19115367
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet Impala Submodels:
- LS, LT, LTZ, Police, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS

2007 Chevrolet Impala Antenna Cable

With a comprehensive array of OEM 2007 Chevrolet Impala Antenna Cable, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2007 Chevrolet Impala Antenna Cable are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2007 Chevrolet Impala Antenna Cable Parts Questions & Experts Answers

Q: How to replace the antenna cable on 2007 Chevrolet Impala?
A: First remove the rear upper quarter trim panel and disconnect the Antenna Cable from the radio antenna module. Start by removing the rear seat cushion followed by the rear seat back before you move to the right carpet retainers and right lower center pillar trim panel. Adjust the carpet when necessary to reach the Antenna Cable and unplug the Antenna Cable from the antenna extension cable . Trim the Antenna Cable sections exposed to view off the wiring harnesses found both in the kick panel region and the rear shelf region. To attach the Antenna Cable install electrical tape on the vehicle to fasten the antenna extension cable on top of the wiring harness at intervals not exceeding 150mm (6 inches). Watch out for the sliding snap-lock component since maintaining pressure on it blocks successful installation. Install the antenna extension cable from the radio to the Antenna Cable near the kick panel by sliding it through the locking mechanism behind the sliding lock and securing the installation to the sliding lock. Reinstall carpet then right lower center pillar trim panel followed by right carpet retainers before installing rear seat back and rear seat cushion. Put the Antenna Cable behind the sliding lock before you install it to the sliding lock to connect the Antenna Cable with the radio antenna module. Then reinstall the rear upper quarter trim panel.