How to replace the Antenna Cable for the digital radio on 2006 Chevrolet Impala?

Start by removing the right rear upper quarter trim panel followed by lowering the rear of the headliner until you reach the antenna/cable attachment area. Use the roof to adjust the antenna cable mastic patch/tape before disconnecting the antenna cable from its connector on the base. Free the antenna cable retainer from the rear header portion while disconnecting the cable from dome lamp harness clips to put the cable outside the upper quarter panel and dome lamp harness area. Take a thin wire or string to attach the antenna cable end and route it through the rear shelf toward the rear wheel house before operating on the right rear compartment trim panel. Take the antenna cable off the digital radio receiver then remove both holders from the receiver bracket. Once the wire or string clearance is complete you need to remove the antenna cable from the system. Position antenna cable retainers onto receiver bracket before connecting antenna cable to digital radio receiver. Pull the new antenna cable through the shelf to reach the passenger area thanks to the string or wire from the initial step; afterward install the right rear trim panel and eliminate the string or wire. The dome lamp harness serves as the guide for the antenna cable which should be attached to its clips and the antenna cable retainer must be mounted to the rear header. Next connect the antenna cable to the antenna base cable connector then apply mastic patch/tape at the roof and reinstall the rear of the headliner and finally install the right rear upper quarter trim panel.

OEM 2006 Chevrolet Impala Antenna Cable

Radio Antenna Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Antenna Cables found

View related parts
2006 Chevrolet Impala Cable
Part Number: 19115060
$29.32 MSRP: $45.93
You Save: $16.61 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly, Mobile Telephone Antenna
- Item Weight: 0.60 Pounds
- Item Dimensions: 10.3 x 10.5 x 1.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19115060
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Chevrolet Impala Submodels:
- LS, LT, LTZ, Police, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
View related parts
2006 Chevrolet Impala Antenna Cable
Part Number: 19115058
$22.37 MSRP: $35.04
You Save: $12.67 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly, Digital Radio Antenna
- Item Weight: 0.40 Pounds
- Item Dimensions: 130.2 x 1.5 x 0.9 inches
- Condition: New
- SKU: 19115058
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following 2006 Chevrolet Impala Submodels:
- LS, LT, LTZ, Police, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
View related parts
2006 Chevrolet Impala Cable
Part Number: 15879137
Product Specifications
- Item Weight: 0.40 Pounds
- Item Dimensions: 162.3 x 1.5 x 0.9 inches
- Condition: New
- SKU: 15879137
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following 2006 Chevrolet Impala Submodels:
- 50th Anniversary Edition, LS, LT, LTZ, Police, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
View related parts
2006 Chevrolet Impala Antenna Cable
Part Number: 15235718
Product Specifications
- Other Name: Cable
- Item Weight: 0.40 Pounds
- Item Dimensions: 137.9 x 1.5 x 0.9 inches
- Condition: New
- SKU: 15235718
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following 2006 Chevrolet Impala Submodels:
- 50th Anniversary Edition, LS, LT, LTZ, Police, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
View related parts
2006 Chevrolet Impala Cable
Part Number: 19115211
$14.15 MSRP: $25.26
You Save: $11.11 (44%)
Product Specifications
- Other Name: Cable Assembly, Radio Antenna
- Item Weight: 0.80 Pounds
- Item Dimensions: 12.9 x 12.4 x 3.5 inches
- Condition: New
- SKU: 19115211
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following 2006 Chevrolet Impala Submodels:
- LS, LT, LTZ, Police, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
View related parts
2006 Chevrolet Impala Cable
Part Number: 19115367
Product Specifications
- Other Name: Cable Assembly, Radio Antenna; Cable, Radio Antenna
- Item Weight: 0.80 Pounds
- Item Dimensions: 13.2 x 9.4 x 2.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19115367
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Chevrolet Impala Submodels:
- LS, LT, LTZ, Police, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
View related parts
2006 Chevrolet Impala Antenna Cable
Part Number: 19115069
Product Specifications
- Other Name: Cable Assembly, Radio Antenna; Cable, Radio Antenna
- Item Weight: 0.90 Pounds
- Item Dimensions: 13.9 x 13.0 x 3.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19115069
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Chevrolet Impala Submodels:
- LS, LT, LTZ, Police, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS

2006 Chevrolet Impala Antenna Cable

With a comprehensive array of OEM 2006 Chevrolet Impala Antenna Cable, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2006 Chevrolet Impala Antenna Cable are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2006 Chevrolet Impala Antenna Cable Parts Questions & Experts Answers

Q: How to replace the Antenna Cable for the digital radio on 2006 Chevrolet Impala?
A: Start by removing the right rear upper quarter trim panel followed by lowering the rear of the headliner until you reach the antenna/cable attachment area. Use the roof to adjust the antenna cable mastic patch/tape before disconnecting the antenna cable from its connector on the base. Free the antenna cable retainer from the rear header portion while disconnecting the cable from dome lamp harness clips to put the cable outside the upper quarter panel and dome lamp harness area. Take a thin wire or string to attach the antenna cable end and route it through the rear shelf toward the rear wheel house before operating on the right rear compartment trim panel. Take the antenna cable off the digital radio receiver then remove both holders from the receiver bracket. Once the wire or string clearance is complete you need to remove the antenna cable from the system. Position antenna cable retainers onto receiver bracket before connecting antenna cable to digital radio receiver. Pull the new antenna cable through the shelf to reach the passenger area thanks to the string or wire from the initial step; afterward install the right rear trim panel and eliminate the string or wire. The dome lamp harness serves as the guide for the antenna cable which should be attached to its clips and the antenna cable retainer must be mounted to the rear header. Next connect the antenna cable to the antenna base cable connector then apply mastic patch/tape at the roof and reinstall the rear of the headliner and finally install the right rear upper quarter trim panel.