How to Replace a Vehicle Speed Sensor on 2006 Chevrolet Impala?

The procedure to change the Vehicle Speed Sensor (VSS) begins by lifting and supporting the vehicle first. Take off the right front tire and wheel, and after that, detach the VSS electrical connector. After that, take out the VSS bolt and lift the VSS out of the extension case, and then take off the O-ring from the VSS . When installing, put the O-ring onto the VSS and reinstall the VSS into the housing. After putting the VSS bolt back on, tighten it to 12 Nm (106 inch lbs.), always checking the Fastener Notice in Service Precautions first. Connect the VSS electrical connector, fit the right front wheel and tire back onto the car, and then lower the vehicle as the last step.

OEM 2006 Chevrolet Impala Vehicle Speed Sensor

VSS

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Vehicle Speed Sensor found

View related parts
2006 Chevrolet Impala Vehicle Speed Sensor
Part Number: 24232088
$38.31 MSRP: $63.11
You Save: $24.80 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly-Vehicle Speed; Speed Sensor; Sensor, Computer Control; Electronic Brake Control; Speedometer Driven; Speedometer Drive
- Replaces: 10456568, 12523306
- Item Weight: 0.40 Pounds
- Item Dimensions: 2.3 x 2.3 x 2.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 24232088
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Chevrolet Impala Submodels:
- 50th Anniversary Edition, Base, LS, LS Sport, LT, LTZ, Police, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS

2006 Chevrolet Impala Vehicle Speed Sensor

With a comprehensive array of OEM 2006 Chevrolet Impala Vehicle Speed Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2006 Chevrolet Impala Vehicle Speed Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2006 Chevrolet Impala Parts Questions & Experts Answers

Q: How to Replace a Vehicle Speed Sensor on 2006 Chevrolet Impala?
A: The procedure to change the Vehicle Speed Sensor (VSS) begins by lifting and supporting the vehicle first. Take off the right front tire and wheel, and after that, detach the VSS electrical connector. After that, take out the VSS bolt and lift the VSS out of the extension case, and then take off the O-ring from the VSS . When installing, put the O-ring onto the VSS and reinstall the VSS into the housing. After putting the VSS bolt back on, tighten it to 12 Nm (106 inch lbs.), always checking the Fastener Notice in Service Precautions first. Connect the VSS electrical connector, fit the right front wheel and tire back onto the car, and then lower the vehicle as the last step.

Related 2006 Chevrolet Impala Parts

Alternate Year Models

2005 Chevrolet Impala Vehicle Speed Sensor 2007 Chevrolet Impala Vehicle Speed Sensor