OEM 2007 Chevrolet Malibu Automatic Transmission Filter

2007 Chevrolet Malibu Parts Questions & Experts Answers

• Q: How to Service and Repair the Automatic Transmission Filter and Seal for the 4T45-E Automatic Transaxle on 2007 Chevrolet Malibu?

  A: Before servicing and repairing the automatic transmission fluid filter and seal for 4t45-e automatic transaxle it is essential to properly support and position the vehicle on a hoist. Location a drain pan underneath the transaxle Oil Pan followed by bolt removal from the front and sides while only giving the rear bolts four-turns of loosening. A gentle tool application against the Oil Pan should be followed by using a soft mallet to induce drainage. You should check fluid color through the air before eliminating the Oil Pan bolts and removing the Oil Pan with its gasket. Proceed by taking away successively the oil level control valve followed by the Oil Filter together with the Oil Filter o-ring seal. Be cautious when removing the filter neck seal to prevent any damage to the transaxle case. Employ a chisel to indent the top of the filter neck seal to reduce the press fit before discarding it along with cleaning all former gasket remnants. Apply solvent to clean the transaxle case alongside Oil Pan gasket surfaces before they can dry naturally through air exposure. When installing new components begin by using petroleum jelly as a lubricant while inserting a new filter neck seal with a large socket or mallets and applying petroleum jelly to the new filter o-ring seal before placing the filter into the case. Begin by installing the oil level control valve followed by placing the new Oil Pan gasket and Oil Pan in position. Start all bolts by hand before torquing them to 12 n.m (9 lb ft). Deliver the vehicle to a lower position when you need to add dexron(R)iii p/n 21019223 or equivalent oil to reach the specified refill capacity of 6.5 l (6.9 qt) for bottom pan removal or 9 l (9.5 qt) for complete overhaul or 12.2 l (12.9 qt) for dry capacity. Begin the engine operation to warm the transaxle and inspect for fluid leaks while verifying that the fluid maintains the correct level.