How to replace the Crankshaft Position Sensor on 2007 GMC Acadia?

Before replacing the crankshaft position sensor you should start by removing the exhaust manifold lower heat shield. FirstDisconnect the engine wiring harness electrical connector from the crankshaft position (CKP) sensor. Then remove the crankshaft sensor bolt to remove the crankshaft sensor. To install the position sensor position it first followed by bolt installation and bolt torque to 10 N.m (89 lb in). You must reconnect the engine wiring harness electrical connector to the CKP sensor before finally reinstalling the exhaust manifold lower heat shield.

OEM 2007 GMC Acadia Crankshaft Position Sensor

Engine Crankshaft Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Crankshaft Position Sensor found

View related parts
2007 GMC Acadia Crankshaft Position Sensor Part Number: 12613030
$36.50 MSRP: $68.55
You Save: $32.05 (47%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Engine Crankshaft Position Sensor; Camshaft Position Sensor; Crankshaft Sensor
- Replaces: 12590991
- Item Weight: 0.40 Pounds
- Item Dimensions: 3.0 x 2.2 x 0.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12613030
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 GMC Acadia Submodels:
- SLE, SLT | 6 Cyl 3.6 L GAS

2007 GMC Acadia Crankshaft Position Sensor

With a comprehensive array of OEM 2007 GMC Acadia Crankshaft Position Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2007 GMC Acadia Crankshaft Position Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2007 GMC Acadia Crankshaft Position Sensor Parts and Q&A

Q: How to replace the Crankshaft Position Sensor on 2007 GMC Acadia?
A: Before replacing the crankshaft position sensor you should start by removing the exhaust manifold lower heat shield. FirstDisconnect the engine wiring harness electrical connector from the crankshaft position (CKP) sensor. Then remove the crankshaft sensor bolt to remove the crankshaft sensor. To install the position sensor position it first followed by bolt installation and bolt torque to 10 N.m (89 lb in). You must reconnect the engine wiring harness electrical connector to the CKP sensor before finally reinstalling the exhaust manifold lower heat shield.